LED Strip

LED Strip

LED strip lighting gives a continuous, flexible line of light that can be cut to length and run along a shelf, under a cabinet, or around a ceiling recess. Collingwood's range covers IP20 strips for dry indoor use through to the fully waterproof IP68 rated LSC85 for outdoor and wet locations, in outputs from 4.8W to 9.6W per metre, with a dotless option giving an especially smooth, even line of light. Check the IP rating matches your installation location before ordering.

Filters

Sort by:

45 products

Collingwood LSC85 IP68 LED strip light curved into an S shape, showing the red waterproof silicone edge seal and individual warm white LED chips along the flexible tapeClose up of a straight length of Collingwood LSC85 IP68 LED strip, showing the evenly spaced LED chips, solder points and CE marking on the flexible circuit board
Collingwood LSC85 LED Strip, IP68, 9.6W/m - Bespoke Lengths up to 20m - Low Voltage Sale priceFrom £23.56 inc. VAT
Collingwood COF dotless LED strip curved in an S shape, showing the continuous chip on flex light line with 24V+ and 24V- markings along the copper solder pointsClose up of the Collingwood COF dotless LED strip laid flat, showing the 24V+ and 24V- connection points and cut marks along the tape
Collingwood COF Dotless LED Strip - 8W/m, 5m Reel with Self Adhesive Backing Sale price£62.68 inc. VAT
Collingwood LSV42 white LED strip curved in an S shape on a white background, showing the individual LED chips, printed cut points and LSV42 branding, and the self adhesive backing tape along its length.
Collingwood LSV42 LED Strip, IP44, 4.8W p/m - 5m Reel Only - Low Voltage Sale price£36.35 inc. VAT
Collingwood LSV02 low voltage LED strip laid out straight, showing the individual warm white LEDs, CE and RoHS markings, and 24V polarity labels on the flexible white tapeCollingwood LSV02 LED strip curved into an S shape, showing the peeled adhesive backing, printed LSV02 label and numbered LED and resistor points along the tape
Collingwood LSV02 LED Strip, IP20 4.8W/m - Low Voltage Sale priceFrom £12.54 inc. VAT
Collingwood LSV05 LED strip light laid out straight on a white background, showing the flexible 8mm tape and closely spaced LED chips along its lengthClose-up of the Collingwood LSV05 LED strip curved into an S shape, showing the self adhesive backing, copper solder pads and DC24V markings printed on the tape
Collingwood LSV05 LED Strip, IP20 9.6W/m - Low Voltage Sale priceFrom £25.07 inc. VAT
Collingwood SM7 slim surface mount aluminium profile, angled view showing the plain anodised finish and open LED channelCollingwood SM7 profile shown from the opposite angle, with the recessed channel that holds the LED strip visible along its length
Collingwood 7mm Slim Surface Mount Profile & Diffuser Sale priceFrom £14.09 inc. VAT
Collingwood LSK2208SD strip to driver connector photographed alone on a plain white studio background. A small square white plastic clip body with a bright metal contact plate visible across its top, and a looped twin core flying lead in red and black leaving one side, ending in bare tinned copper wire tips.
Collingwood Strip to Driver Connector for LSV02 and LSV05 8mm LED Strip Sale price£1.88 inc. VAT
Collingwood LSNS IP67 neon LED strip, unlit, shown curved in an S shape on a white background to show the flexible side bend profile
Collingwood LSNS IP67 Neon LED Strip - Side Bend - Low Voltage Sale priceFrom £75.21 inc. VAT
Close up studio shot of the Collingwood SP50 white flexible LED tape running diagonally across a plain white background, with a single row of warm white LED chips and a marked cut point showing the 24V solder pads.Angled studio view of a section of the 8mm wide white SP50 strip, showing the even spacing between the warm white LED chips and the small resistors set into the tape between them.
Collingwood SP50 4.8W/m IP20 LED Strip Pack - 5m Reel and IP20 Driver - Low Voltage Sale price£41.25 inc. VAT
Clear polycarbonate L bend connector for Collingwood 8mm LED strip, angled view showing the moulded corner housing.Front view of the Collingwood L bend connector showing the copper contact strips inside the clear housing.
Collingwood L Bend Connector for LSV02 and LSV05 8mm LED Strip Sale price£1.25 inc. VAT
Clear polycarbonate Collingwood strip to strip LED connector shot at a three quarter angle on a plain white studio background, the moulded body open at both ends to reveal two sprung metal contact clamps inside.
Collingwood Strip to Strip Connector for LSP and LSC02 10mm LED Strip Sale price£1.25 inc. VAT
Collingwood LSC86 LED strip light curved into an S shape on a white background, showing the flexible white tape and the red adhesive backing peeled back along its lengthClose up of a straight length of Collingwood LSC86 LED strip light, showing the individual LED chips and printed markings along the white flexible tape
Collingwood LSC86 LED Strip, IP68, 17W/m - Bespoke Lengths up to 10m - Low Voltage Sale priceFrom £47.14 inc. VAT
Collingwood LSP 5m LED strip coiled unlit on a white background, showing the dense row of 238 LED chips per metre and 24V+ polarity markings printed along the tapeClose up of the Collingwood LSP LED strip lit in cool white, coiled into loose loops to show the continuous, dotless line of light along the tape
Collingwood LSP 5m LED Strip Sale price£56.91 inc. VAT
Collingwood Flex Bend Connector for LSP and LSC02 10mm LED strip, two white polycarbonate connector housings joined by a flexible red and black cable, studio shot on a white background
Collingwood Flex Bend Connector for LSP and LSC02 10mm LED Strip Sale price£2.51 inc. VAT
Collingwood flex bend connector for 8mm LED strip, showing two white clip on connector heads joined by a red and black flexible cable
Collingwood Flex Bend Connector for LSV02 and LSV05 8mm LED Strip Sale price£2.51 inc. VAT
Collingwood end cap for LSNS side bend neon LED strip, clear polycarbonate housing with exposed metal connector pins at the open end
Collingwood End Cap for LSNS Side Bend Neon LED Strip Sale price£6.07 inc. VAT
Collingwood LSK2208SS strip to strip LED connector shown alone at a three quarter angle on a plain white studio background. The clear polycarbonate body has a shallow open channel through the middle, with a hinged clamp at each end and bright silver metal contact blades set into the recesses.
Collingwood Strip to Strip Connector for LSV02 and LSV05 8mm LED Strip Sale price£1.25 inc. VAT
Collingwood deep recessed 28mm aluminium LED profile with the opal plastic diffuser clipped into place, shown at an angle on a white backgroundCollingwood deep recessed 28mm profile shown disassembled, with the anodised aluminium channel and the opal plastic diffuser lens laid separately to show the deep recessed design
Collingwood Deep Recessed 28mm Profile & Diffuser - 2 Metres Sale price£31.55 inc. VAT
Collingwood 2P connector for LSNT top bend neon LED strip, cable at bottom, showing the clear polycarbonate housing with visible steel contacts and the white 2 core flying lead looped beside the strip clip end
Collingwood 2P Connector for LSNT Top Bend Neon LED Strip - Cable at Bottom Sale price£9.28 inc. VAT
Collingwood 2 pin connector for LSNS neon LED strip, clear polycarbonate housing with white flying lead and plug
Collingwood 2P Connector for LSNS Side Bend Neon LED Strip - Cable at End Sale price£9.28 inc. VAT
Collingwood LSNT1312SS strip to strip neon connector photographed open on a plain white studio background, the clear polycarbonate housing angled towards the camera with rows of metal contact pins visible inside and the square strip opening facing forward, shown alongside a separate transparent contact carrier holding two steel blades and three small pale sealing inserts laid out in front.Close plain studio shot of the Collingwood LSNT1312SS neon strip connector fully assembled on white, a small rectangular block of transparent polycarbonate seen at a low angle, with the darker steel contacts showing through the clear body and the open square entry for the 13x12mm strip at the near end.
Collingwood Strip to Strip Connector for LSNT Top Bend Neon LED Strip Sale price£6.07 inc. VAT
Collingwood LSK2212SD strip to driver connector on a plain white studio background, shown at an angle. A small clear and white moulded clip with a hinged lid and visible metal contacts inside sits at the lower right, with a long looped twin core lead in red and black running from it to bare tinned wire ends at the upper left.
Collingwood Strip to Driver Connector for LSC04, LSC05 and LSC06 12mm LED Strip Sale price£1.88 inc. VAT
Collingwood clear polycarbonate L bend connector for 10mm LED strip, angled view showing the two right angle channel armsFront on view of the Collingwood L bend connector showing the copper contact strips inside each arm of the clear polycarbonate housing
Collingwood L Bend Connector for LSP and LSC02 10mm LED Strip Sale price£1.25 inc. VAT
Collingwood LSNT top bend end cap in clear polycarbonate, angled studio shot showing the open channel end and the exposed steel spring contact pins inside
Collingwood End Cap for LSNT Top Bend Neon LED Strip Sale price£6.07 inc. VAT
Collingwood end cap for the SM7 surface mount profile, grey ABS, studio shot showing the closed top with no cable holeTechnical dimension diagram of the Collingwood SM7 end cap showing overall size of 24.2mm by 8mm and the oval cable hole cutout used on the cable hole version
Collingwood End Cap for SM7 Surface Mount Profile Sale priceFrom £1.61 inc. VAT
Collingwood flex bend connector for 12mm LED strip, two white clip on connector heads joined by a flexible red and black lead cable
Collingwood Flex Bend Connector for LSC04, LSC05 and LSC06 12mm LED Strip Sale price£2.51 inc. VAT
Collingwood 2 pin connector for LSNS neon LED strip, clear polycarbonate housing with steel contacts and a white flying lead exiting to the left toward the plug
Collingwood 2P Connector for LSNS Side Bend Neon LED Strip - Cable at Left Sale price£9.28 inc. VAT
Collingwood 2 pin connector for LSNT top bend neon LED strip, clear polycarbonate housing showing steel contact pins, with the 2 core flying lead exiting from the end in line with the strip run
Collingwood 2P Connector for LSNT Top Bend Neon LED Strip - Cable at End Sale price£9.28 inc. VAT
Collingwood 2 pin connector for LSNT top bend neon strip, cable at right, showing the clear polycarbonate housing with steel contacts and the white flying lead with 2 pin plug
Collingwood 2P Connector for LSNT Top Bend Neon LED Strip - Cable at Right Sale price£9.28 inc. VAT
Collingwood LSR05 RGBW LED strip curved in an S shape, close up showing the individual LED chip clusters and cut points along the tapeCollingwood LSR05 RGBW LED strip laid out straight, full length view of the 5m reel showing the repeating cut lines along its run
Collingwood LSR05 IP20 15W Max Colour Change LED Strip - 5m Reel (Bespoke Lengths Available) - Low Voltage Sale price£407.37 inc. VAT
Collingwood LSV45 white LED strip reel curved in an S shape on a white background, showing the exposed self adhesive backing tape and individual LED chips along its 8mm wide flexible tape.
Collingwood LSV45 LED Strip, IP44, 9.6w p/m - 5m reel only - Low Voltage Sale price£47.63 inc. VAT
Collingwood LSNS strip to strip connector shown disassembled on a plain white studio background. The clear polycarbonate sleeve sits at an angle with its square socket end open, showing rows of steel contact pins inside. A separate small clear contact carrier with protruding steel pins lies to the right, and four small pale silicone inserts, two flat pads and two short blocks, are laid out in front of the housing.Close up studio shot of the assembled Collingwood LSNS strip to strip connector on a plain white background. The clear polycarbonate body is photographed at a three quarter angle with the open square socket facing the camera, so the steel contact pins and the internal channel are visible through the transparent housing. A small retaining tab is visible on the side of the sleeve.
Collingwood Strip to Strip Connector for LSNS Side Bend Neon LED Strip Sale price£6.07 inc. VAT
Plain white studio shot of the Collingwood LSNS1217SSF connector kit, showing two small clear bodied connector housings with visible metal contacts inside, next to a looped white flexible link cable with a moulded white connector head at each end.
Collingwood Strip-Cable-Strip Connector for LSNS Side Bend Neon LED Strip Sale price£9.28 inc. VAT
Plain white studio shot of the Collingwood strip to cable to strip connector kit for LSNT top bend neon LED strip, laid flat and photographed at a slight angle. Two small rectangular housings in clear polycarbonate sit on the left with their bright metal contact pins and internal blades visible through the transparent moulding. To the right, a short length of soft white round cable is coiled into a loop, with a flat white moulded plug at each end that pushes into the clear housings.
Collingwood Strip-Cable-Strip Connector for LSNT Top Bend Neon LED Strip Sale price£9.28 inc. VAT
Collingwood CO7 mounting bracket in spring steel, shown alongside a short length of the CO7 surface mount corner profile it is designed to fix in place
Collingwood Mounting Bracket for CO7 Surface Mount Corner Profile Sale price£3.94 inc. VAT
Two angled views of Collingwood's anodised aluminium mounting bracket for the SM28 surface mount profile, showing the ribbed front face and the underside with its two fixing screw holes.Technical dimension diagram of the Collingwood SM28 surface mount profile cross section that this bracket is designed to fit, showing a 33mm top width, 30mm base width, 26mm internal channel width and 31mm height.
Collingwood Mounting Bracket for SM28 Surface Mount Profile Sale price£3.37 inc. VAT

LED strip lighting gives you a continuous, flexible line of light that can be cut to length and run along a shelf, under a kitchen cabinet, or around a ceiling recess for a soft, indirect glow.

A strip for every application

Collingwood's range covers IP20 strips like the LSV02 and LSV05 for dry indoor use, through to the fully waterproof IP68 rated LSC85 for outdoor and wet locations, in a range of outputs from 4.8W to 9.6W per metre. Their COF dotless strip gives an especially smooth, even line of light with no visible individual LED points.

Good to know

  • Check the IP rating matches where you intend to install the strip, IP20 for dry indoor use only, IP44 and above for anywhere exposed to moisture.
  • LED strip needs a compatible driver, sized to the total wattage of the length you're running. See our LED strip accessories collection for connectors and profiles.
Path Lights
Outdoor lighting collection at Moonlight Design, garden wall lights and pathway lights at dusk
Outdoor Lighting
Chandelier Lights
Table Lamps
Pendant Lights
Island Pendant Lights

We're Proud To Offer

5-Star Service

Fast, reliable, and always helpful—our friendly team is here to support you every step of the way.

Technical Expertise

With 20+ years of experience, we offer trusted advice and reliable solutions you can count on.

Competitive Pricing

Great value without compromise—competitive prices on quality products, every time.

Design Service

Since 2003, our experts have delivered dynamic lighting designs and professional installations that transform spaces.