Collingwood

Collingwood

Collingwood Lighting is a UK company based in Northamptonshire, with roots stretching back to 1901 though it has focused solely on LED technology since 2002. The brand states it was the first company to supply purpose-built LED lighting to the UK's electrical wholesale market, and it went on to develop fully waterproof, sealed-for-life outdoor fittings and, in 2008, one of the first fire-rated LED downlights. At Moonlight Design you'll find Collingwood's full range: fire-rated and trimless downlights, adjustable spotlights and architectural panels for indoors, alongside spike lights, ground lights, bollards, wall lights and floodlights built for gardens and exteriors. The catalogue also runs to LED strip lighting, dimmer switches and the drivers, sensors, bezels and connectors needed to complete an installation, making it a range built as much for electricians and lighting designers as for homeowners.

Filters

Sort by:

358 products

Close studio shot of the Collingwood SL220 spike light head on a plain white background, a short black cylinder tilted to the right with a clear faceted lens and reflector visible in the front opening, and the top of the black stem below it.Full length studio shot of the Collingwood SL220 spike light on a plain white background, showing the black cylindrical head angled upward on a long slim ground spike that tapers to a point.
Collingwood WL342 brushed stainless steel step light, angled studio shot showing the square bevelled flange and the recessed shell shaped asymmetric lens with the Collingwood logo mark above itCollingwood WL342 brushed stainless steel step light viewed from above at a low angle, showing the flush square flange profile and the pale glass asymmetric lens set into the brushed steel face
Collingwood H2 Deco CSP downlight in white, straight on view showing the flush white bezel and recessed reflectorCollingwood H2 Deco CSP downlight in white, angled view showing the sprung mounting clips and heat sink body
Collingwood H2 Pro Extreme white IP65 downlight, angled view showing the recessed bezel and clear LED lensCollingwood H2 Pro Extreme white downlight tilted to show the black driver housing, spring clips and mains wiring leads at the back of the fitting
Collingwood GL019 frosted mini ground light in stainless steel, angled view showing the recessed body, spring retaining clip and illuminated frosted lens engraved with the Collingwood name and 316 steel gradeCollingwood GL019 frosted mini ground light in stainless steel, top down angled view of the round bezel and frosted lens engraved with the Collingwood name
Collingwood GL019 Eyelid LED ground light in stainless steel, angled three quarter view showing the cylindrical body and the domed eyelid lens covering the top half of the front glassCollingwood GL019 Eyelid LED ground light viewed from above, showing the round stainless steel flange and the eyelid shaped dome shading the recessed lens
Collingwood SL220 low voltage spike light on a plain white studio background, angled view with the matte bronze anodised cylindrical head tilted to one side, a slim amber bezel ring around the clear faceted reflector lens, and the narrow bronze stem running down towards the ground spike.Technical line drawing of the Collingwood SL220 spike light in side view, dimensioned with a 62.5mm diameter head, 440mm overall height and a 240mm spike section, alongside a boxed note reading 3m flying lead.
Close up studio shot of the Collingwood SL130 spike light head on a plain white background, a dark near black cylindrical metal housing tilted forward on a slim upright stem, with the faceted clear lens and its ring bezel facing the cameraFull length side view of the Collingwood SL130 garden spike light against a plain white background, showing the small angled cylindrical head at the top, the long slender dark metal stem and the pointed spike tip at the base
Cropped studio shot of the Collingwood SL130 spike light on a plain white background, showing the bronze anodised barrel head tilted to the right on its knuckle joint, a brass toned bezel ring around a clear textured lens, and the slim stem continuing down out of the frameFull length studio shot of the bronze Collingwood SL130 spike light on a plain white background, the small barrel head angled to the right above a long slim anodised aluminium stem that tapers to a pointed ground spike
Collingwood WL041 IP fan effect wall light in anodised aluminium, angled studio view showing the disc of over a hundred radiating fins and the wall mounting plate.Front on studio view of the Collingwood WL041 IP wall light, showing the full radial pattern of aluminium fins and the small Collingwood logo badge at the centre.
Collingwood WL339 stainless steel cast finish step light, front on studio shot of the round textured flange with the fixing screw and asymmetric lens slot visibleCollingwood WL339 step light at an angle, showing the recessed cylindrical body, mounting tabs either side and the glass lens strip set into the cast stainless steel flange
Collingwood WL340 stainless steel step light, front on studio shot showing the brushed circular flange, embossed Collingwood logo above the lens, and the half moon frosted glass diffuser.Collingwood WL340 stainless steel step light viewed from a low angle, showing the depth of the brushed steel flange and the recessed frosted lens strip that casts the asymmetric beam.
Collingwood H2 Lite CSP downlight in white, angled view showing the round bezel, lit LED lens and the navy blue driver body with yellow spring clips extendedCollingwood H2 Lite CSP downlight in white, front on view of the round bezel and chrome trim ring around the lit lens
Collingwood H4 Pro round bezels fanned out to compare finishes, white with the LED downlight lit up front, then matt white, brushed steel and chrome behind
Collingwood Spydra spike light in black with a domed cover, plain studio render showing the full pole, ground spike and the cable connector just below the head.Collingwood Spydra spike light in black with a flat cover, plain studio render showing the full pole, ground spike and the cable connector just below the head.
Collingwood LUXI 290 up and down wall light in anthracite, studio shot showing the cylindrical cast aluminium body, the frosted lower lens and the rear wall plate with cable and fixing pointsCollingwood LUXI 290 style up and down wall lights installed along a covered exterior walkway in daylight, mounted between doorways under a timber slatted ceiling
Collingwood GL018 C AB antique brass marker light, three quarter angle view showing the round frosted lens, engraved Collingwood branding on the rim, and the spring mounting clips on the cylindrical bodyCollingwood GL018 C AB antique brass marker light, low angle view of the brass face showing the frosted lens and Collingwood text engraved around the rim
Collingwood BL01 wooden LED bollards shown in three timber and top options: a dark Sapele finish with a domed top, a pale Oak finish with a flat chamfered top, and a medium Iroko finish with a pointed top, each with the angled light head near the top and cable entry holes visible at the base.
Collingwood GL040 stainless steel ground light, angled view showing the recessed lens, brushed steel bezel and Collingwood branding
Collingwood GL050 stainless steel ground light seen from directly above, showing the brushed metal bezel and frosted glass lens with Collingwood branding etched into the rimCollingwood GL050 stainless steel ground light at an angle, showing the cylindrical body, spring mounting clips and set screw used to secure it in the ground
Collingwood GL016 LED ground light in stainless steel, top down view showing the brushed bezel engraved with the Collingwood name and the clear frosted lens at the centreCollingwood GL016 stainless steel ground light seen at an angle, showing the cylindrical body stamped 316 for the grade of stainless steel and the side mounted cable gland
Collingwood GL016 black frosted LED ground light viewed from above at an angle, showing the round frosted lens and black stainless steel surround with etched Collingwood logoSide view of the Collingwood GL016 ground light showing the black cylindrical body, mounting tabs and fixing screw beneath the frosted lens face
Collingwood UL010 stainless steel LED spotlight, angled studio shot on a white background showing the ribbed heat sink body, clear lens and square mounting base plate with bolt fixings.Technical line drawing of the Collingwood UL010 spotlight showing its overall height, a 65mm by 65mm base footprint, and the length of the attached cable.
Collingwood GL019 mini LED ground light in stainless steel, angled close up of the round face showing the Collingwood logo and engraved branding around the clear lensCollingwood GL019 mini LED ground light in stainless steel, three quarter view showing the round face on top and the cylindrical 316 stainless steel body with spring clip fixing below
Collingwood GL016 LED ground light in black finish, viewed from above showing the round clear lens and flush bezel with Collingwood logo.Collingwood GL016 ground light at an angle, showing the black cylindrical body and stainless steel mounting clips used to fix it in the ground.
Collingwood LSNS IP67 neon LED strip, unlit, shown curved in an S shape on a white background to show the flexible side bend profile
Collingwood Spydra spike light in grey aluminium with a domed cover on a 300mm pole, studio image on white background showing the front elevation, spike base and cable exit with bare flying leads.Collingwood Spydra spike light in grey aluminium with a domed cover on a 300mm pole, studio image on white background from a slightly rotated angle showing the curve of the domed top.
Collingwood LSC05 LED strip curved into an S shape on a white background, showing the warm white LEDs, marked cut points and 24V wiring labels along the 12mm flexible tapeClose up of the Collingwood LSC05 LED strip laid flat and unlit on a white background, showing the closely spaced LEDs and driver ICs along the slim flexible circuit board
Collingwood H4 Lite CSP round bezel in matt black, angled view showing the flat black ring around the downlight's textured lensCollingwood H4 Lite CSP round bezel in brushed steel, angled view showing the brushed metal ring around the downlight's textured lens
Collingwood H2 Sense downlight bezel in brushed steel, straight on view showing the round trim and clear lens with no PIR sensor windowAngled view of the Collingwood H2 Sense brushed steel bezel showing the black spring clip fixings and downlight body used to mount it into the ceiling
Collingwood H4 Lite CSP recessed downlight with a matt white bezel, angled view showing the tiltable gimbal head with the LED lens exposed and sprung ceiling fixing clips extended.Collingwood H4 Lite CSP recessed downlight with a brushed steel bezel, angled view showing the tiltable gimbal head with the LED lens exposed and sprung ceiling fixing clips extended.
Collingwood H2 Sense brushed steel bezel viewed face on, showing the central clear lens with the round daylight sensor and PIR presence sensor windows set into the lower part of the trim.Angled view of the Collingwood H2 Sense brushed steel bezel showing the black plastic housing behind the trim, the spring loaded ceiling fixing clips and the wiring terminal block.
Slim rectangular LED driver in cream off white plastic, shown at a three quarter angle on a plain white studio background. A dense printed specification label covering the top face reads DC MAXI JOLLY US with a current selection switch chart, and a small moulded cable clip sits at the near corner.
Collingwood LSC85 IP68 LED strip light curved into an S shape, showing the red waterproof silicone edge seal and individual warm white LED chips along the flexible tapeClose up of a straight length of Collingwood LSC85 IP68 LED strip, showing the evenly spaced LED chips, solder points and CE marking on the flexible circuit board
Collingwood GH220 Glare Guard Hood in black anodised aluminium, angled cylindrical shield viewed from the sideCollingwood GH220 Glare Guard Hood in brushed stainless steel 316, angled cylindrical shield viewed from the side
Collingwood GH220 Glare Guard Hood Sale priceFrom £34.80 inc. VAT
Collingwood GL019 Ultra Low Glare mini LED ground light in black, angled studio shot showing the recessed lens face and cylindrical body with spring clip fixings

Collingwood Lighting specialises in high-quality LED light fittings for indoor and outdoor applications. Renowned for their unwavering quality and performance, these lights are among the most reliable on the market. Collingwood Lighting works in all settings, from homes and kitchens to gardens and commercial installations. At Moonlight Design, we're proud to bring you an extensive range of Collingwood light products and fixtures, from Collingwood ground lights to Collingwood spike lights and all essential LED drivers and accessories to create unique lighting designs.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo