Collingwood Flex Bend Connector for LSV02 and LSV05 8mm LED Strip

A Bend You Can Make Without Solder

This flex connector joins two lengths of Collingwood's LSV02 or LSV05 8mm LED strip without any soldering. Clip the ends in and you get a solid connection that sits flush and stays hidden once the strip is fitted.

Polycarbonate Body, Copper Contacts

The connector body is polycarbonate, with copper contacts inside that carry the current between the two strip ends. It has a slim profile, so it fits inside most standard aluminium strip channels without adding bulk.

How It Works

Each end of the connector clips onto the cut end of an 8mm strip. No tools, no soldering iron, no wire stripping. Line up the contacts, press the clip closed, and the connection is made. The flexible cable between the two clips lets you bend the strip round corners or awkward angles where a rigid joint would not sit properly.

Where It Works Best

Reach for this connector when a single length of LSV02 or LSV05 strip needs to turn a corner, wrap round a shelf edge, or bridge a small gap between two runs, for example around a kitchen plinth, inside a coving detail, or along a staircase string. It suits installers who need a fast, reliable joint on site without carrying a soldering kit.

Collingwood Lighting

Collingwood Lighting designs and manufactures its LED products from Sywell, Northamptonshire, and has specialised in LED technology since 2002. Connectors like this one are part of the wider LED strip systems the brand has built its reputation on, and Collingwood has been awarded a Gold medal by EcoVadis, placing it in the top 5% of companies assessed globally for sustainability.

Good to Know

• Rated IP20, so it is designed for dry indoor use only.
• Class I electrical rating.
• Made from polycarbonate with copper contacts.
• Covered by a 2 year warranty from Collingwood.
• This item is non returnable, so please check your strip is from the LSV02 or LSV05 8mm range before ordering.
• Moonlight Design recommends installation by a registered NICEIC electrician for any mains wired LED strip system.

Questions People Ask

Will this fit any 8mm LED strip?
No. It is sized specifically for Collingwood's LSV02 and LSV05 8mm strip ranges, so check your strip model before ordering.

Do I need to solder anything?
No. The connector clips onto the cut ends of the strip, so no soldering iron or tools are needed.

Can I use it outdoors?
No. It has an IP20 rating, which means it is suitable for dry indoor locations only.

Will it fit inside an aluminium strip channel?
Yes. Its slim profile is designed to sit inside most standard aluminium channels used with 8mm strip.

• Collingwood Strip Light Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.