Collingwood Flex Bend Connector for LSC04, LSC05 and LSC06 12mm LED Strip

A Bend Without a Soldering Iron

Running LED strip around a corner usually means cutting the strip, stripping wires, and soldering a joint by hand. This flex bend connector skips all of that. It clips onto the cut ends of your strip and carries the connection through a flexible lead, so the strip can turn a corner cleanly without a single solder joint.

Made for LSC04, LSC05 and LSC06

This connector is sized specifically for Collingwood's LSC04, LSC05 and LSC06 12mm LED strip ranges. The clip contacts are cut to match the pad spacing on these strips, so it only works with that width. Check your strip model before ordering, since a connector sized for a different strip won't make a reliable contact.

How It Works

• Two solder free clips press onto the copper contact pads at the cut end of each strip length
• A flexible red and black lead runs between the clips, letting the joint bend around a corner or across a gap
• The slim profile fits inside most standard aluminium strip profiles, so the join stays hidden once the diffuser is back in place
• No tools beyond a pair of hands are needed to fit it on site

Where It Works Best

This connector earns its place wherever an LED strip run needs to change direction or bridge a small gap, kitchen cabinet returns, coving that turns a corner, staircase strings, or two separate strip lengths that need linking into one continuous run. Because it clips rather than solders, it's a practical fix for retrofit jobs and repairs too, where reworking a joint with a soldering iron isn't convenient.

Collingwood Lighting

Collingwood has been developing LED technology since 2002, and its strip and connector ranges are designed and made from the company's site in Sywell, Northamptonshire. The brand says it was among the first to bring fire rated and sealed for life LED products to the UK electrical wholesale market, and its wider catalogue is built around that same emphasis on getting the detail right. Collingwood has also been awarded a Gold medal by EcoVadis, ranking it in the top five percent of companies assessed globally for sustainability.

Good to Know

• Rated IP20, so it's designed for dry indoor locations rather than bathrooms or outdoor use
• Made from polycarbonate with copper contacts
• Class I electrical rating
• Covered by a 2 year warranty
• This item is non returnable, so do check it matches your strip range before ordering

Questions People Ask

Do I need to solder anything to fit this?
No. The connector clips directly onto the cut end of the strip, no soldering or crimping tools required.

Will this fit any 12mm LED strip?
No. It's made specifically for Collingwood's LSC04, LSC05 and LSC06 strip ranges. Strip from other ranges or other brands may not line up with the contact spacing.

Can it be used outdoors?
No. It's rated IP20, which means it's intended for dry indoor locations only.

Does it fit inside an aluminium profile?
Yes. Its slim design fits inside most standard aluminium LED strip profiles, so the join stays hidden once the profile and diffuser are fitted.

• Collingwood Strip Light Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.