Collingwood L Bend Connector for LSV02 and LSV05 8mm LED Strip

Turn the corner without cutting a thing

Running Collingwood's LSV02 or LSV05 8mm LED strip around a corner usually means stopping, cutting, and rewiring. This L bend connector skips all that. It clips straight onto the end of one strip run and joins the next at a right angle, so you get a clean, continuous corner without a single soldered joint.

Built to disappear once fitted

The housing is clear polycarbonate, moulded to sit flush with the strip profile so it stays hidden once the corner is capped or recessed. Inside, copper contacts line up with the strip's copper pads and lock the connection in place. There's nothing to solder and nothing exposed once it's clipped shut.

How It Works

• Slide the connector's contact pins onto the copper pads at the end of one strip length.
• Clip the second strip length into the other arm of the connector at a right angle.
• Press until both sides click into place. No tools, solder or crimping required.

Where It Works Best

This connector earns its keep anywhere an LED strip run needs to change direction indoors, around a kitchen plinth, along the inside edge of a coving profile, or turning a corner inside a recessed channel. Because it's rated IP20, keep it to dry indoor runs. It isn't designed for bathrooms, outdoor runs, or anywhere it could get wet.

Part of the Collingwood LED System

Collingwood Lighting has been developing LED technology since 2002 from its site in Sywell, Northamptonshire, where accessories like this connector are designed and made to work alongside its wider range of 8mm LED strip. The company says it was among the first to bring fire rated, fully sealed for life, and mains dimmable LED products to the UK electrical wholesale market, and its sustainability performance has earned it a Gold medal from EcoVadis, placing it in the top 5% of companies assessed worldwide.

Good to Know

• Compatible with Collingwood LSV02 and LSV05 8mm LED strip only.
• Rated IP20, so it's suited to dry indoor installations rather than bathrooms or outdoor runs.
• Polycarbonate housing with copper contacts, Class I electrical rating.
• Covered by a 2 year warranty.
• Sold on a non returnable basis, in line with Collingwood's strip accessories.

Questions People Ask

• Will this fit any 8mm LED strip? No. It's designed specifically for Collingwood's LSV02 and LSV05 8mm strip and isn't guaranteed to fit strip from other ranges or brands.
• Do I need to solder or crimp anything? No. It's a solder free, push fit connector. You just clip the strip ends into either arm.
• Can I use it in a bathroom or outdoors? No. It's rated IP20, which means it's built for dry indoor use only.
• Can the joint be taken apart and refitted? It's designed as a one time push fit connection, so it's best treated as permanent once clipped into place.
• Is it returnable if I order the wrong one? No. Like Collingwood's other strip accessories, it's sold on a non returnable basis, so it's worth checking your strip model before ordering.

• Collingwood Strip Light Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.