Collingwood GL019 Mini LED Ground Light - Antique Brass - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
7 Years Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Ground Light Built to Disappear Into the Floor
The GL019 Mini sits flush with decking, paving or an entrance floor and sends light upward without drawing attention to the fitting itself. At just 40mm across, it fits into spots a full size ground light never could, while still giving enough output to mark a path, a step or a doorway after dark.
Finished in Antique Brass
This version is finished in antique brass over a 316 stainless steel body. The warm, aged brass tone works well against natural stone, timber decking or reclaimed brick, and the stainless steel underneath means the finish is built to hold up outdoors rather than just look good in a showroom.
How It Works
- Low voltage fitting that runs from a separate LED driver rather than straight off the mains.
- Two current settings to choose from, drawing 1W at 350mA or 2W at 700mA, so output can be matched to the driver and circuit.
- Available in 2700K warm white or 3000K, and in a narrow 12° spot or a wider 38° flood, so the beam can be chosen to suit the space.
- Dimmable when paired with a suitable driver.
- Needs just a 33mm cut out to fit.
Where It Works Best
Because it's rated IP68 and built from 316 stainless steel, this is a light for gardens, driveways, patios and coastal properties where it will be walked over and rained on for years. Use it to line a path, pick out a step, mark the edge of a deck or wash light up a wall or planting from ground level. The IK07 impact rating means it can take a knock from a chair leg or a dropped tool without failing.
Collingwood Lighting
Collingwood Lighting designs and manufactures its LED products from Sywell in Northamptonshire, and has specialised in LED technology since 2002. Sealing a fitting against water for the long term sits at the centre of that work: Collingwood states it was among the first manufacturers to bring fully waterproof, sealed for life LED products to the UK electrical wholesale market, which is exactly what a walk over ground light like this one needs to do. The company has also been awarded a Gold medal by EcoVadis, placing it in the top 5% of companies assessed globally for sustainability.
Good to Know
- Rated IP68, sealed for wet, buried and coastal locations.
- IK07 rated for impact resistance, so it can be walked over and take knocks.
- 316 stainless steel body with an antique brass finish.
- Class III low voltage fitting, needs a separate LED driver rather than a mains connection.
- Dimmable with a suitable driver.
- Backed by a 7 year guarantee from Collingwood.
- Moonlight Design recommends installation by a registered NICEIC electrician.
Questions People Ask
Can I walk on this ground light?
Yes. It's rated IK07 for impact resistance and designed as a walk over fitting for paths, patios and driveways.
Does it need its own driver?
Yes. This is a low voltage fitting and needs a separate LED driver sized to the circuit. It isn't designed to run directly from the mains.
What size hole do I need to cut?
The GL019 Mini needs a 33mm cut out, with the fitting itself measuring 40mm across and 41mm deep.
Is it suitable for a coastal garden?
Yes. The IP68 rating and 316 stainless steel body are built to handle wet, coastal and buried locations.
Can I choose between a spot and a flood beam?
Yes. It's available with a narrow 12° beam or a wider 38° beam, in either 2700K or 3000K colour temperature.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
