Commercial Lighting

Commercial Lighting

Specifying lighting for a commercial project usually means working to a brief that covers emergency backup, glare control and colour consistency across a whole scheme. Collingwood's H2 Deco offers wattage and colour switchable output from a single fitting, the Thea Pro is built to a UGR19 glare rating for spaces like offices, and the DALI-2 emergency plug in kit adds compliant emergency backup lighting to a compatible downlight. Installation should always be carried out by a qualified electrician.

Filters

Sort by:

58 products

Collingwood H2 Deco CSP downlight in white, straight on view showing the flush white bezel and recessed reflectorCollingwood H2 Deco CSP downlight in white, angled view showing the sprung mounting clips and heat sink body
Collingwood H2 Pro Extreme downlight in anthracite grey, angled top down, recessed face plate and illuminated LED lensCollingwood H2 Pro Extreme downlight in anthracite grey, straight on view showing the ribbed LED lens lit in warm white
Collingwood H2 Pro Extreme IP65 downlight in black, front on, matte black bezel and clear CSP LED lens, on whiteCollingwood H2 Pro Extreme IP65 downlight in black from below at an angle, finned aluminium body, chrome spring clips
Collingwood H2 Pro Extreme white IP65 downlight, angled view showing the recessed bezel and clear LED lensCollingwood H2 Pro Extreme white downlight tilted to show black driver housing, spring clips and mains leads at the back
Collingwood Thea Pro downlight at an angle, flat white trim, white reflector cone, black terminal block and driver leadCollingwood Thea Pro downlight in profile, plug lead from the recessed fitting to its separate rectangular LED driver
Collingwood Tilt Adjustable 147mm stainless steel ground light, angled, brushed bezel with recessed screws, tilt knob
Collingwood DALI-2 emergency plug-in kit, converter and lithium battery pack on mounting plate with wires fanned outCollingwood DALI-2 emergency plug-in kit installed in a Caiman CSP downlight, with EM test button, converter and battery
Collingwood H2 Deco CSP downlight in white bezel and black reflector, straight on, recessed black cone and warm LED glowCollingwood H2 Deco CSP downlight in white bezel and black reflector, angled, finned heat sink and spring clips
Collingwood 119mm tilt adjustable ground light, angled, round stainless bezel with two screws, tinted lens, finned body
Round recessed ground light, raised angle, stainless bezel with two screws, tilted lens block, three LED optics
Collingwood tilt adjustable ground light, round 316 stainless bezel, tilted LED lens, ribbed black anodised body
Two Collingwood Caiman Versa 4ft LED battens in grey polycarbonate, side by side and unlit on white, mounting clipsCollingwood Caiman Versa 4ft LED batten switched on, angled, lit diffuser and metal mounting clips along the housing
Collingwood EUP30T1HMC0 panel power supply on white, angled, white casing with ribbed heat sink fins and mounting lugs
Collingwood 165mm Tilt Adjustable stainless ground light, brushed bezel with countersunk screws, black body, tilt knob
Collingwood Versa Tile 1500mm linear light in black, angled full length view, slim housing, pale diffuser strip, end capClose angled shot of Collingwood Versa Tile black end profile, tapered wedge housing, fixing hole and cutout
Collingwood Tilt Adjustable 193mm ground light, brushed stainless bezel, three screws, tilted lens, finned black body
Collingwood Solis LED panel at an angle on white, slim white aluminium frame, pale grey micro textured diffuserClose up of one corner of a white Collingwood Solis LED panel, square edged frame and micro prismatic diffuser
Collingwood Solis 1200 x 300 LED Panel Sale priceFrom £53.62 inc. VAT
Collingwood H2 Deco CSP downlight in black, angled, flush black bezel and reflector with the LED lit warm whiteCollingwood H2 Deco CSP downlight in black from below, finned heatsink, spring clips, reflector lit warm white
Collingwood Domino CSP ultra low glare panel in black, angled, 4x4 grid of recessed square LED cells set flushCollingwood Domino CSP ultra low glare panel in black, angled view of the flush 600mm panel and recessed LED cells
Two Collingwood Caiman Versa 5ft LED battens side by side at an angle, full length of the grey polycarbonate housingCollingwood Caiman Versa 5ft LED batten shown lit at an angle, with diffused white light along its full length
LEDS C4 Gong pendant in Speckled Terracotta, studio shot of the round textile shade on three suspension cablesLEDS C4 Gong Speckled Terracotta pendant hanging against a plain pale wall, lit, with white diffuser underneath
LedsC4 Gong Pendant - Speckled Terracotta Sale priceFrom £748.43 inc. VAT
Collingwood Versa Tile 1500mm linear light in white, angled overhead, slim housing, diffuser channel, end cap sensorClose underside angle of Collingwood Versa Tile in white, trapezoidal diffuser profile, circular sensor lens on top edge
Collingwood 193mm tilt adjustable RGBW ground light, top down view of brushed 316 stainless bezel and lensed LEDs
Collingwood Tilt 165mm RGBW ground light in profile, brushed 316 stainless bezel, glass lens with coloured LED emitters
Collingwood Versa Tile 1500mm linear light in silver, angled shot, slim illuminated diffuser and low profile housingUnderside of a silver triangular section linear light with split lens, unlike the slim Versa Tile profile
Collingwood Tilt 223mm RGBW ground light in stainless steel, cutaway, ring of LED chips under lens, black body
Collingwood Tilt 147mm RGBW ground light in stainless steel, angled, brushed bezel with four screws, finned black body
Collingwood self test emergency plug-in kit for Caiman CSP, close up of converter with lithium iron phosphate batteryCollingwood self test emergency plug-in kit fitted inside an open Caiman CSP batten, converter, battery and wiring
Collingwood Salvus Route black emergency spot in a white ceiling, seen from below, TEST bezel, status LED, clear lensClose view of black Salvus Route emergency spot in a white ceiling, corridor lens protruding below the flat black bezel
Collingwood microwave sensor dimming plug-in kit for Caiman CSP, compact white sensor module with detector dome on whiteClose up inside a Collingwood Caiman CSP fitting with the microwave sensor plugged in beside the driver and wiring
Small white Merrytek motion sensor module, angled studio shot, raised domed lens, two receiver lenses and CE label
Collingwood microwave sensor plug-in kit for Caiman CSP, angled white module with switches and certification marks
Collingwood manual test emergency plug-in kit for Caiman CSP, white control unit with battery pack and wiring loom
Collingwood Domino CSP white recessed ceiling panel at an angle, 4x4 grid of recessed LED cells and thin edge profileCollingwood Domino CSP white recessed panel from the opposite corner, shallow 18mm housing depth against the ceiling
Three Collingwood Caiman Versa anti-corrosive LED battens grouped, grey polycarbonate housing, spring clips, unlitCollingwood Caiman Versa LED batten from below at an angle, lit, glowing diffuser and side spring clips
Bover Noren S/123 pendant in dark grey fabric, straight on view on plain background, full 123cm length and cablesClose up of Bover Noren S/123 dark grey acoustic fabric panel, woven textile weave and aluminium trim along one edge

Specifying lighting for a commercial project usually means working to a brief that covers more than just light output, emergency backup, glare control and colour consistency across a whole scheme all matter. Our commercial lighting collection is built around Collingwood's specification grade downlight ranges.

Specification grade downlights

Collingwood's H2 Deco offers wattage and colour switchable output from a single fitting, useful for standardising stock across a project with varying requirements, while the Thea Pro is built to a UGR19 glare rating for spaces where visual comfort matters, such as offices. The H2 Pro Extreme is rated IP65 for exposed commercial locations, and the DALI-2 emergency plug in kit adds emergency backup lighting to a compatible downlight for compliance in commercial buildings.

Good to know

  • Commercial lighting installation should always be carried out by a qualified electrician in line with current building regulations.
  • Check whether your project requires emergency lighting provision, and confirm compatibility with the DALI-2 emergency kit before specifying.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo