Collingwood

Discover Collingwood Lighting at Moonlight Design, offering high-performance LED lighting solutions for both indoor and outdoor spaces. Renowned for exceptional quality, reliability, and energy efficiency, Collingwood lights are ideal for homes, kitchens, gardens, and commercial projects. Explore our range of ground lights, spike lights, downlights, wall lights, LED drivers, and accessories to create professional, long-lasting lighting designs.

357 products

Collingwood WL95 bulkhead light fitted with the white eyelid accessory, angled studio shot on a plain white background showing the solid opaque top half of the eyelid and the frosted lens visible across the bottom half.

Collingwood WL95 Eyelid for Bulkhead (Optional Accessory) - White

£8.19

inc. VAT

Collingwood WL342 antique brass step light, angled studio shot of the square brass faceplate with bevelled edge and half moon shaped asymmetric lens

Collingwood WL342 antique brass step light viewed from the side and rear, showing the round recessed body behind the faceplate and the mounting bracket with fixing screws

Collingwood WL342 Asymmetric Step Light - Antique Brass - Straight to Mains

£579.28

inc. VAT

Collingwood WL340 asymmetric step light in antique brass, plan view from above showing the round brushed brass bezel and the crescent shaped lens set off centre, plain white studio background.

Collingwood WL340 antique brass step light viewed from the side, showing the depth of the round housing, the frosted asymmetric lens and the stainless steel spring fixing clip used to secure it in a cut out.

Collingwood WL340 Asymmetric Step Light - Antique Brass - Straight to Mains

£485.78

inc. VAT

Collingwood WL339 stainless steel cast finish step light, front on studio shot of the round textured flange with the fixing screw and asymmetric lens slot visible

Collingwood WL339 step light at an angle, showing the recessed cylindrical body, mounting tabs either side and the glass lens strip set into the cast stainless steel flange

Collingwood WL339 Asymmetric Straight to Mains Cast Finish Step Light - Stainless Steel

£339.62

inc. VAT

Collingwood WL220 wall light in brushed stainless steel, three quarter angle studio shot on a white background, showing the circular wall plate and the cylindrical spotlight head tilted to one side with the clear LED lens visible.

Collingwood WL220 wall light in brushed stainless steel, straight on studio shot on a white background, showing the cylindrical spotlight head face on with the round wall plate behind it.

Collingwood WL220 LED Wall Light - Stainless Steel - Straight to Mains

£218.70

inc. VAT

Studio shot of the Collingwood WL220 wall light in black anodised aluminium, photographed at a three quarter angle with the cylindrical head tilted forward on its circular wall backplate and the LED visible through the front lens, on a plain white background.

Front on studio shot of the Collingwood WL220 wall light in black anodised aluminium, showing the circular wall backplate and the cylindrical spot head facing the camera with the LED lit behind its lens, on a plain white background.

Collingwood WL220 LED Wall Light - Black - Straight to Mains

£200.29

inc. VAT

Collingwood WL075 SPS wall light in an aluminium silver finish, plain studio product photo from a three quarter angle. The hourglass shaped body flares out at both ends with a circular mounting backplate on the left and a clear lens visible in the lower cone, the Collingwood name embossed along the body.

Collingwood WL075 SPS Straight to Mains High Output LED Wall Light - Aluminium Silver

£337.15

inc. VAT

Collingwood WL075 SPS High Output LED Wall Light - Bronze - Straight to Mains

£337.15

inc. VAT

Collingwood WL070RGBW up and down wall light in silver anodised aluminium, three quarter angle studio shot showing the pinched hourglass housing, circular wall mounting plate, and the clear lens over the upper LED module.

Collingwood WL070RGBW up and down wall light in silver anodised aluminium, straight on studio shot against a white background showing the hourglass shaped body with a light source at each end.

Collingwood WL070RGBW 24W Max Up/Down LED Colour Change Wall Light - Silver - Low Voltage

£417.63

inc. VAT

Collingwood WL070 SPS wall light in aluminium silver, studio product shot on a white background showing the hourglass shaped body, circular wall mounting plate and the upward facing lens.

Collingwood WL070 SPS Straight to Mains, High Output LED Wall Light - Aluminium Silver

£263.70

inc. VAT

Angled studio shot of the Collingwood WL070 SPS wall light in gloss black anodised aluminium, showing the waisted hourglass body, the frosted lens in the top aperture, and the circular wall mounting plate behind it, on a plain white background.

Front on studio shot of the Collingwood WL070 SPS wall light in gloss black anodised aluminium, showing the symmetrical waisted body with open apertures at the top and bottom and the round wall mounting plate visible behind it, on a plain white background.

Collingwood WL070 SPS Straight to Mains High Output LED Wall Light - Aluminium Black

£263.70

inc. VAT

Collingwood WL060 wall light in aluminium finish, angled studio shot showing the cylindrical body, round wall plate and frosted glass middle band, light switched off.

Collingwood WL060 wall light in aluminium finish, front angled studio shot showing the frosted glass band and the small downward flood lens near the base, light switched off.

Collingwood WL060 Straight to Mains LED Halo/Flood Wall Light - Aluminium

£147.95

inc. VAT

Collingwood WL041 IP fan effect wall light in anodised aluminium, angled studio view showing the disc of over a hundred radiating fins and the wall mounting plate.

Collingwood WL041 IP Straight to Mains Fan Effect LED Wall Light - Anodised Aluminium

£124.38

inc. VAT

Collingwood H2 Sense downlight assembly in white, three quarter angle view showing the round bezel, recessed LED module, black cylindrical housing and a sprung wire terminal block to the rear

Collingwood H2 Sense downlight assembly in white, side angle view showing the black rear housing, sprung retaining clip and connector wires behind the white bezel

Collingwood White Bezel for H2 Sense - Without PIR Sensor (Bezel only)

£3.92

inc. VAT

Collingwood white H2 Sense bezel with PIR sensor, three quarter angle studio shot showing the sprung mounting clips extended and the black downlight driver housing behind the faceplate.

Collingwood white H2 Sense bezel with PIR sensor, three quarter view with the spring clips folded up against the black downlight body and the LED lens and sensor dome visible at the centre.

Collingwood White Bezel for H2 Sense - With PIR Sensor (Bezel only)

£7.85

inc. VAT

Collingwood Wall Mounted Photocell Kit

£13.85

inc. VAT

Collingwood Versa Tile 1500mm architectural linear light in white, angled overhead studio shot showing the slim aluminium housing and smooth diffuser channel with a sensor point on the end cap.

Collingwood Versa Tile 1500mm Architectural Linear Light - White

From £181.86

inc. VAT

Collingwood Versa Tile 1500mm Architectural Linear Light - Silver

From £181.86

inc. VAT

Collingwood Versa Tile 1500mm architectural linear light in black, angled studio shot of the full length fitting showing the slim black aluminium housing and the pale diffuser strip running the length of the fixture, with an end cap detail visible at one corner.

Collingwood Versa Tile 1500mm Architectural Linear Light - Black

From £181.86

inc. VAT

Collingwood Universal Remote Control for Microwave Sensor

£65.93

inc. VAT

Collingwood UL030 SPS stainless steel garden spotlight on a white studio background, showing the ribbed heat sink barrel, round lens face and adjustable swivel bracket bolted to a square drilled base plate.

Technical dimension drawing of the Collingwood UL030 SPS spotlight, showing a 60mm diameter head, 90mm overall height, a 65mm square fixing base plate and the 3m flying lead.

Collingwood UL030 SPS High Output Universal LED Light - Stainless Steel - Low Voltage

£229.77

inc. VAT

Collingwood UL030 SPS spotlight in brass, angled studio shot on a white background showing the square four hole base plate, the adjustable stainless steel yoke with brass locking bolt, and the clear front lens over the built in LED.

Technical line drawing of the Collingwood UL030 SPS spotlight showing a 60mm head diameter, 90mm overall height, a 65mm by 65mm base plate, and the 3 metre flying lead.

Collingwood UL030 SPS High Output Universal LED Light - Brass - Low Voltage

£245.39

inc. VAT

Collingwood TR2818 Wi-Fi to RF transmitter, plain studio shot on a white background. The black metal case sits at an angle showing two long black antennas standing upright, one with its gold SMA connector visible. The front panel is printed with the model number TR2818, terminal wiring markings, CE and RoHS certification symbols, and a small screw terminal block and status lights are visible at the base, with a keyhole mounting bracket underneath for fixing the unit to a wall or cabinet.

Collingwood TR2818 Wi-Fi to RF Transmitter App Control (Requires Driver)

£80.86

inc. VAT

Studio shot on a white background of the Collingwood tilt adjustable ground light, angled to show the round 316 stainless steel bezel with its mounting screw holes, the tilted LED lens recessed inside, and the ribbed black anodised aluminium body with adjustment tab below.

Collingwood Tilt Adjustable 223mm Cut-Out Ground Light - Stainless Steel - Straight to Mains

From £446.84

inc. VAT

Collingwood Tilt Adjustable 223mm RGBW ground light in stainless steel, studio cutaway shot showing the round brushed steel bezel with countersunk fixing screws, the ring of LED chips beneath the lens, and the black finned aluminium body with a cable gland on the side.

Collingwood Tilt Adjustable 223mm Cut-Out Ground Light - RGBW - Stainless Steel - Low Voltage

£518.59

inc. VAT

Studio product shot of the Collingwood Tilt Adjustable 193mm ground light on a plain white background, showing the round brushed stainless steel bezel with its three visible fixing screws, the dark recessed lens tilted slightly to demonstrate the adjustable beam, and the finned black anodised aluminium body below with the side mounted tilt adjustment slot visible.

Collingwood Tilt Adjustable 193mm Cut-Out Ground Light - Stainless Steel - Straight to Mains

From £374.91

inc. VAT

Collingwood 193mm tilt adjustable RGBW ground light shown on a plain white studio background, a top down view of the round brushed 316 stainless steel bezel and the cluster of individually lensed LEDs, with the finned anodised aluminium body visible extending below.

Collingwood Tilt Adjustable 193mm Cut-Out Ground Light - RGBW - Stainless Steel - Low Voltage

£418.33

inc. VAT

Collingwood 165mm Tilt Adjustable ground light in stainless steel, studio shot of the recessed fitting sitting above ground showing the round brushed stainless steel bezel with evenly spaced countersunk fixing screws, the black finned anodised aluminium body below, and the small tilt adjustment knob set into the side of the housing.

Collingwood Tilt Adjustable 165mm Cut-Out Ground Light - Stainless Steel - Straight to Mains

£361.99

inc. VAT

Collingwood Tilt Adjustable 165mm Cut-Out Ground Light - RGBW - Stainless Steel - Low Voltage

£351.57

inc. VAT

Collingwood Tilt Adjustable 147mm ground light in stainless steel, studio shot at an angle showing the round brushed bezel with recessed fixing screws on top and the finned black anodised aluminium body with the tilt adjustment knob below.

Collingwood Tilt Adjustable 147mm Cut-Out Ground Light - Stainless Steel - Straight to Mains

From £217.62

inc. VAT

Collingwood Tilt 147mm RGBW ground light in stainless steel, angled studio shot on a white background showing the round brushed steel bezel with four fixing screws and the central lens, above the black finned anodised aluminium body with its side mounted cable gland connector.

Collingwood Tilt Adjustable 147mm Cut-Out Ground Light - RGBW - Stainless Steel - Low Voltage

£257.28

inc. VAT

Round recessed ground light shot at a raised angle on a plain white studio background, showing a brushed stainless steel bezel with two countersunk fixing screws, a dark recessed well holding a tilted lens block with three small clear LED optics, and a ribbed black plastic body underneath with a side cable entry.

Collingwood Tilt Adjustable 119mm Cut-Out Ground Light - RGBW - Stainless Steel - Low Voltage

£187.09

inc. VAT

Collingwood Thea Pro downlight seen at an angle, showing the flat white trim and recessed white reflector cone, with the black terminal block and driver lead visible above the ceiling line

Collingwood Thea Pro High Performance UGR19 Downlight (Using Insert) - 145-180mm

From £38.29

inc. VAT

Collingwood P1SK suspension kit shown on a plain white studio background, two bright steel ceiling brackets each with a cone shaped cable gripper, fine braided steel wires, and silver spring clip carabiners at the cable ends.

Collingwood Suspension Kit for 600 x 600 & 1200 x 300 LED Panels

£10.90

inc. VAT

Collingwood Surface Mount Kit for Solis 600 x 600 LED Panels

£25.66

inc. VAT

Collingwood Surface Mount Kit for Solis 1200 x 600 LED Panels

£43.60

inc. VAT

Collingwood Lighting specialises in high-quality LED light fittings for indoor and outdoor applications. Renowned for their unwavering quality and performance, these lights are among the most reliable on the market. Collingwood Lighting works in all settings, from homes and kitchens to gardens and commercial installations. At Moonlight Design, we're proud to bring you an extensive range of Collingwood light products and fixtures, from Collingwood ground lights to Collingwood spike lights and all essential LED drivers and accessories to create unique lighting designs.