Collingwood WL075 SPS High Output LED Wall Light - Bronze - Straight to Mains

A Focused Point of Light for Framing an Entrance or Pillar

The WL075 is a compact, single point source LED wall light built for straight to mains wiring outdoors. Rather than washing a whole wall in light, it throws a narrow, concentrated beam that picks out one spot, a doorway, a gate post, a garden pillar, and leaves the surrounding brick or stone in shadow around it. That contrast between light and shade is what gives an entrance its shape after dark, and this bronze outdoor wall light is built around that effect.

Bronze Finish in Anodised Aluminium

This version is finished in bronze, an anodised aluminium coating that reads as a warm, deep brown rather than a bright metallic tone. It settles well against brick, natural stone, oak or render, and pairs comfortably with door furniture or ironmongery in aged brass or bronze tones. The fitting is a two part design, a round wall plate stamped with the Collingwood C logo, and a slightly flared forward housing that directs the beam down through a small circular lens set into its base.

How It Works

This is a straight to mains fitting with an integral driver built into the housing itself, so there is no separate transformer to find space for. It connects directly into your outdoor lighting circuit at the point where it is mounted. The wiring is a parallel type, which means several WL075 units can be linked along the same run if you are lighting a row of pillars or a length of boundary wall. The LED runs at 5.7W and is fixed at manufacture in one of three colour temperatures, 2700K warm white, 3000K warm white or 4000K neutral white, so decide on the tone before ordering rather than after. It comes supplied with the fixings needed to mount it to a wall or pillar.

Where It Works Best

Built to IP65 in anodised aluminium, this light is designed to live outdoors, either side of a front door, mounted to a gate pillar, or spaced along a garden wall or driveway. Collingwood lists it as suitable for coastal, exposed sites, so it is built to cope with salt air and driving rain as well as a sheltered porch. The same IP65 rating also covers bathroom zone 2, so this fitting can equally work as a small, focused wall light in a bathroom or wet room. Read our guide to bathroom lighting zones before installing it in a bathroom.

About Collingwood Lighting

Collingwood designs and manufactures its LED lighting from Sywell in Northamptonshire, and has worked solely in LED technology since 2002. The brand states it was among the first to bring fire rated, fully sealed for life and mains dimmable LED products to the UK electrical wholesale market, helping push LED adoption ahead of much of the industry at the time. Collingwood has also been awarded an EcoVadis Gold medal, placing it in the top five percent of companies assessed worldwide for sustainability.

Good to Know

• Measures 104mm high and 80mm in diameter, projecting 144mm from the wall.
• Backed by a 7 year manufacturer warranty.
• Rated IP65, sealed against dust and powerful water jets, so it suits permanent outdoor use and also meets bathroom zone 2 requirements indoors.
• Class I electrical construction, so it needs a proper earth connection as part of the mains wiring.
• Not dimmable, and the colour temperature is fixed at manufacture, so choose 2700K, 3000K or 4000K before you order.
• LED lifetime is rated at L70 70,000 hours, meaning output is expected to stay above 70 percent of its original brightness across that period.
• Colour rendering index of 80, giving reasonably true colours when it lights up brick, stone or render.
• Finished in anodised aluminium, wipe clean with a soft, damp cloth rather than an abrasive one.
• Moonlight Design recommends installation by a registered NICEIC electrician.

Questions People Ask

• Is the Collingwood WL075 suitable for outdoor use? Yes, the WL075 is rated IP65 and built in anodised aluminium, and Collingwood specifically lists it as suitable for coastal and other exposed outdoor locations.
• Can the Collingwood WL075 wall light be dimmed? No, this fitting is not dimmable, so it should be run on a standard switched lighting circuit rather than through a dimmer.
• Does the WL075 need a separate transformer? No, it is a straight to mains fitting with an integral driver built into the housing, so it connects directly to a mains lighting circuit with no external driver needed.
• What colour temperatures does the Collingwood WL075 come in? It comes fixed in 2700K warm white, 3000K warm white or 4000K neutral white, with the colour temperature set at manufacture rather than adjustable after installation.
• How long does the LED in the WL075 last? Collingwood rates the LED lifetime at L70 70,000 hours, meaning the output is expected to remain above 70 percent of its original brightness across that span of use.

104mm height x 80mm width x 144mm depth (refer to spec for details)

• Collingwood Wall Light Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.