Drivers and Transformers

Drivers and Transformers

Filters

Sort by:

73 products

Angled studio photograph on a plain white background of the Collingwood PSIP3509W LED driver. A slim rectangular black plastic casing with a lightly ribbed top and a printed white specification label reading LED Power Supply, Model NO.: PSIP3509W, with CE, SELV and IP65 markings and the double insulation square symbol. A round black cable enters each end through a black threaded compression gland, and a small notched fixing lug sits at either end of the casing.
Collingwood PSIP70018W LED driver shown at an angle on a plain white studio background. Slim black plastic case, ribbed along one side, with a printed spec panel on top showing the Collingwood Lighting logo, the model number, the 700mA 18W output and the SELV IP65 marking. A black cable gland at each end holds a short round black lead that runs off out of frame.
Hunza Buriable Transformers for Hunza fittings
Hunza Buriable Transformers for Hunza fittings Sale priceFrom £47.00 inc. VAT
Mains Dimmable Driver T-ELED-60P-C600/2100T - 700mA & 1050mA
Collingwood DRV350700TD LED driver shown at an angle on a white background, with its printed label visible showing TRIAC constant current dimming markings, the dip switch current settings table and a mounting screw hole at each end of the casing.
Mains Dimmable Driver T-ELED-20P-C250-700 - 350mA/700mA
Collingwood PSIP70036W LED driver shot at an angle on a plain white studio background. Slim black plastic case with a ribbed top face and a moulded fixing flange, the printed spec label facing the camera showing the model number, 220 to 240Vac input and 700mA output, with a black cable tail running out through a sealed gland at each end.
Angled studio shot on plain white of the black plastic Collingwood PSIP35018W LED driver, its printed top face label showing the Collingwood logo and SELV IP65 marking, with black two core flying leads entering ribbed sealed cable glands at each end.
Collingwood PS1524 15W 24V LED Driver - IP20 - 1-10V Dimmable
Slim rectangular LED driver in cream off white plastic, shown at a three quarter angle on a plain white studio background. A dense printed specification label covering the top face reads DC MAXI JOLLY US with a current selection switch chart, and a small moulded cable clip sits at the near corner.
Non Dimmable Driver T-LPC-35-1050 - 1050mA
Non Dimmable Driver T-LPC-35-1050 - 1050mA Sale price£57.00 inc. VAT
Transformer for Retro fittings (previously with plastic blue insert)
Collingwood PS6501100MA One4All LED driver photographed at an angle on a plain white studio background. Slim rectangular white polycarbonate case with flat screw fixing tabs at the corners and two cable grommets on the end face. The printed top face shows the Collingwood Lighting logo, the part code and input rating, a full output current and setting table, a bank of five DIP switches marked ON, and the terminal legend for AC input L and N, PUSH, DALI DA1 and DA2, LED output and 0-10V DIM terminals.
Collingwood PSMDIP10024 LED driver photographed at an angle on a plain white studio background. A long matt black rectangular case in steel and aluminium with deep cooling fins running the full length, flat mounting feet with slotted screw holes at each end, a bolted end plate with a black rubber cable grommet, and a printed label on the top face reading LED Driver constant voltage with triac dimming, model PSMDIP10024, 24V 4.17A 100W output and the IP66 and CE marks.
Collingwood PSMD700610 LED driver photographed at an angle on a plain white studio background. Slim rectangular moulded plastic case in white with pale turquoise end caps at each end, a visible screw head in each cap, and the specification label printed along the top face reading LED DRIVER, PSMD700610, primary 220 to 240V AC 50Hz and secondary 700mA 17 to 34V DC max 24W.
Collingwood PLD-Unidrive 350mA LED driver, white plastic casing shown at an angle with the wiring terminal cover, dimming and rating labels visible on top
Orluna M-120 120mA mains dimmable LED driver, 7.2W output
Orluna M-700-L 700mA mains dimmable LED driver, 12W output
LuxR Non Dimmable Driver T-ECP4-IF - 350mA
LuxR Non Dimmable Driver T-ECP4-IF - 350mA Sale price£25.00 inc. VAT
Collingwood CCDRV75RF RF dimmable driver, a white rectangular unit shown at an angle with its front label, colour coded terminal connections and onboard dip switches visible.
Collingwood CCDRV75DMX DMX512 dimmable driver shown at an angle, white plastic enclosure with a printed spec label, built in digital display, dip switches and a terminal block for wiring on one end, with mounting screw holes at the other end.
Collingwood LSD6024 60W 24V LED driver, a white rectangular polycarbonate unit shown at an angle, with mounting tabs at each end and a printed label showing input, output and CE certification details
Plain studio shot on a white background of the Collingwood PLD UNI-DRIVE LED driver, angled from above. Slim rectangular white plastic casing with a moulded fixing tab and keyhole slot on the near edge. The top face is printed with the Collingwood logo, the PLD UNI-DRIVE name, a CE mark and small technical print including a DIP switch diagram for the 350mA and 700mA settings. Terminal markings along the right edge read SYNC, SEC, 1-10V and PUSH with L and N, under a removable screwed end cover.
Mains Dimmable Driver T-ELED-20P-C250-700 - 350mA/700mA
Plain studio shot on white of a finned extruded aluminium LED driver, viewed at a three quarter angle from above. Silver grey ribbed casing with flat end mounting brackets, keyhole fixing slots and black flying lead cables emerging from both ends. The printed label on the top face reads IP66 alongside the model marking ELED-60-24V and Ecopac Power branding, with output figures of 24V DC and 60W.
Collingwood PDC INT 1-10V Dimmable Interface for 24V Drivers
Hunza Pure LED RD Replacement Driver - For Mains Fittings
Angled studio shot of the slimline white plastic PSMD3024 LED driver on a plain white background, with a printed specification label and Ecopac Power branding across the top face, a loading 60 to 100% panel at the far end, and a recessed terminal opening beside two screw fixing holes at the near end.
Orluna M-100 100mA mains dimmable LED driver, 7.2W output
Orluna M-700-2 700mA mains dimmable LED driver, 25W output
Orluna M-300 300mA mains dimmable LED driver, 14W output
Collingwood DMX2102 RGBW/RGB DMX decoder, angled view on a white studio background showing the DC input and DMX terminals on the left, the digital channel display and Collingwood logo in the centre, and the RGBW output terminals on the rightCollingwood DMX2102 RGBW/RGB DMX decoder product cutout, same angled view of the plastic housing with terminal blocks and digital channel display, isolated on a transparent background
Hunza T-LD25W 25 Watt LED Driver (1-10v Dimming)
Mains TRIAC Dimmable LED Dip-Switch Driver - 350mA-1050mA
Black finned metal LED driver photographed at an angle on a plain white studio background, with a short mains lead leaving one end, two output leads leaving the other, flat fixing flanges with screw holes at the corners, and a white printed specification label with CE marks across the top face.
Collingwood PR3011 power repeater at a three quarter angle on a plain white studio background. Slim white rectangular plastic case lying flat, with a printed label across the top reading PR3011 Power Repeater, the Collingwood logo, input and output ratings and CE and RoHS marks. Screw terminals run along both long edges, labelled DC input and signal in and out on one side and V+, R, G, B and W output on the other. A fixing screw sits at each end of the lid and the moulded end lugs are notched.

We're Proud To Offer