Mains Dimmable Driver T-ELED-20P-C250-700 - 350mA/700mA
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
2 years Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Triac Dimmable Constant Current Driver
The T-ELED-20P-C250-700 is a mains dimmable constant current LED driver. It is a replacement for the T-ELED-25-CT Series 25 Watt triac dimmable driver and is designed to power Luxr and Hunza LED fittings. This is a 20W driver, with the output set to 350mA or 700mA by dip switch.
Selectable 350mA and 700mA Output
The output current is selected by dip switch, with multiple levels available between 250 and 700mA. The 350mA and 700mA settings are the ones used with the Luxr and Hunza fittings listed below. The driver is housed in a plastic case that measures 160mm x 43mm x 20mm.
How It Works
The driver runs in constant current mode and is dimmed using triac, or phase cut, dimming. It is protected against short circuit, overload and over current, and it is cooled by free air convection. We recommend that this fitting is installed by a qualified electrician.
Where It Works Best
This is an IP20 driver designed for indoor installation, so it should be fitted indoors or inside a dry, ventilated enclosure rather than left exposed. Check the fitting counts below to make sure you have the right driver for your scheme.
Good to Know
- Luxr M1: 1 to 9 fittings at 350mA
- Luxr M2: 1 to 9 fittings at 700mA
- Luxr M4: 1 to 4 fittings at 700mA
- Hunza 700mA: 1 to 4 fittings at 700mA
- IP20, indoor installation only
- Weight 0.2kg, 2 year warranty
- We recommend all lighting is installed by a qualified electrician
Questions People Ask
Which fittings does this Hunza dimmable driver suit?
It suits Luxr M1 and M2 fittings (1 to 9) and Luxr M4 and Hunza 700mA fittings (1 to 4), at 350mA or 700mA as listed.
How is the output current set on this driver?
The output current is selected by dip switch, with multiple levels between 250 and 700mA.
What type of dimmer works with this driver?
It is triac dimmable, also known as phase cut dimming, using a mains dimmer.
Can this driver be installed outdoors?
No. It is an IP20 driver designed for indoor installation. It should be installed by a qualified electrician.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us