Orluna M-100 Mains Dimmable Driver - 100mA 7.2W

The Orluna M-100 is a 100mA constant current driver with mains dimming, sized for Orluna fittings built around a 100mA LED engine.

Matching This Driver To Your Fitting

Check that the Orluna fitting you are specifying calls for a 100mA constant current supply rather than a similar rating such as 120mA, since driver and fitting current need to match precisely. This driver pairs with standard leading and trailing edge dimmer switches, so confirm the dimmer's rated load range against the fitting's wattage before installation. Your Orluna supplier can confirm the exact current rating if you are working from a specification rather than the fitting itself.

How It Works

The M-100 takes a mains input and regulates it to a constant 100mA output, rated at up to 7.2W. Dimming is carried out on the mains side through a compatible leading or trailing edge dimmer switch, translating into smooth control of the fitting's light output.

Where It Works Best

The M-100 shares its 7.2W ceiling with the M-120, but the two serve different fittings: the M-100 is correct for Orluna fittings built around a 100mA rated LED engine, while the M-120 suits those rated at 120mA. Always check the fitting's specified current rather than assuming wattage alone is enough to choose between them. As with any driver, fit it somewhere accessible for future maintenance.

Made By Orluna

Orluna's overall approach has always been precision engineering and long term reliability rather than chasing the cheapest component on paper, a principle that traces back to its aeronautical engineering roots in 1973 and continues through its current British design and manufacturing led operation. Small components like the M-100 are held to that same standard, built to perform consistently for as long as the fitting it powers.

Good To Know

• Constant current output: 100mA
• Maximum power: 7.2W
• Input: Mains voltage
• Dimming: Compatible with standard leading and trailing edge dimmer switches
• Suitable for use with Orluna fittings rated to the same current
• Covered under Orluna's 20 year spares and repair programme as a replaceable component

Questions People Ask

Is the M-100 interchangeable with the M-120? They share a 7.2W maximum but run at different currents, so the fitting's rated current, not the wattage, determines which one is correct.

Does this driver need a specific dimmer switch? It works with standard leading and trailing edge dimmer switches, though the dimmer's own rated load range should still be confirmed.

Can this driver be used with non Orluna fittings? It is intended for use with Orluna fittings rated for a 100mA supply.

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.