Drive Over Lights

Drive Over Lights

A drive over light is built to take the weight of a car passing directly over it, set flush into a driveway where a standard ground light wouldn't cope. Collingwood's Tilt Adjustable range covers 119mm, 147mm and 223mm cut outs in stainless steel, with mains dimmable and colour changing RGBW options, while Fabula's Capworth offers a surface mounted alternative where a recessed cut out isn't practical. Always confirm a fitting is specifically rated for drive over use before installing it.

Filters

Sort by:

33 products

Collingwood Tilt Adjustable 147mm ground light in stainless steel, studio shot at an angle showing the round brushed bezel with recessed fixing screws on top and the finned black anodised aluminium body with the tilt adjustment knob below.
Angled studio shot of the Collingwood 119mm tilt adjustable ground light, showing the round stainless steel bezel with two fixing screws, a recessed tinted lens, and the finned anodised aluminium body below with its cable entry point.
Round recessed ground light shot at a raised angle on a plain white studio background, showing a brushed stainless steel bezel with two countersunk fixing screws, a dark recessed well holding a tilted lens block with three small clear LED optics, and a ribbed black plastic body underneath with a side cable entry.
Studio shot on a white background of the Collingwood tilt adjustable ground light, angled to show the round 316 stainless steel bezel with its mounting screw holes, the tilted LED lens recessed inside, and the ribbed black anodised aluminium body with adjustment tab below.
Save 10%
Fabula Capworth Surface Mounted 2W LED Drive Over Ground Light, alone on white, light glowing in the slotFabula Capworth Surface Mounted 2W LED Drive Over Ground Light, close-up of the domed top and light slot
Fabula Capworth Surface Mounted 2W LED Drive Over Ground Light - Dark Grey Sale price£110.62 Regular price£122.82 inc. VAT
Hunza Path Light 2 Facet 180 degree in stainless steel, top down view with two light openings forming a wide arcA brick paved path curving beside a hedge and lawn edge at night, with two recessed Hunza Path Lights set into the kerb stone. A Moonlight Design installation, not stock imagery.
Hunza Path Light 3 Facet in stainless steel, top down view with three curved light openings around a central H markA block paved driveway curving at dusk, its edge marked by a row of small recessed Hunza Path Lights, fields beyond.
Hunza Pure LED Driveway Light in solid bronze, top down studio shot showing the bronze flange, black powder coated aluminium body and integrated LED moduleHunza driveway light recessed into a stone entrance threshold at night, Moonlight Design garden lighting project
Hunza Flush Floor Light GU10 in brushed stainless steel, front view of the round face with the lamp visibleDimension diagram for the Hunza Flush Floor Light showing a 104mm flange, 83mm body and 137.5mm depth
Hunza Driveway Light GU10 in stainless steel, top down studio shot showing the steel flange, black powder coated aluminium body and GU10 lamp fittedRow of Hunza driveway lights uplighting an avenue of trees beside a gravel drive at night, Moonlight Design garden lighting project
Collingwood 165mm Tilt Adjustable ground light in stainless steel, studio shot of the recessed fitting sitting above ground showing the round brushed stainless steel bezel with evenly spaced countersunk fixing screws, the black finned anodised aluminium body below, and the small tilt adjustment knob set into the side of the housing.
Studio product shot of the Collingwood Tilt Adjustable 193mm ground light on a plain white background, showing the round brushed stainless steel bezel with its three visible fixing screws, the dark recessed lens tilted slightly to demonstrate the adjustable beam, and the finned black anodised aluminium body below with the side mounted tilt adjustment slot visible.
Hunza Pure LED Washer Recessed in stainless steel, front view of the round bezel and half moon lensHunza Pure LED Washer Recessed in stainless steel with a black canister, seen from the side at an angle
Hunza Path Light 2 Facet Opposites in stainless steel, top down view with two curved light openings on opposite sidesA stone boar sculpture in a floral bed at the centre of a gravel driveway loop, edged by multiple recessed Hunza Path Lights creating starburst points of light at night. A Moonlight Design installation, not stock imagery.
Hunza Pure LED Flush Floor Light in solid copper, top down view of the round face plate with a central LED lensDimension diagram for the Hunza Flush Floor Light showing a 104mm face plate, 83mm body diameter and 137.5mm depth
Hunza Pure LED Path Light 1 Facet in stainless steel seen from above, with one recessed light slot at the edgeA driveway sweeping up to a house at night, lined with recessed Hunza Path Lights along the kerb edge and a low retaining wall, with an uplit tree behind. A Moonlight Design installation, not stock imagery.
Hunza Pure LED Path Light 4 Facet in stainless steel, seen from above with four angled light slots around a centre discA herringbone brick driveway and lawn beside a stone staircase at night, with several recessed Hunza Path Lights dotted across the paving and steps above. A Moonlight Design installation, not stock imagery.
Hunza Pure LED Flush Floor Light in stainless steel from above, flat brushed cover over a ribbed LED lensDimension diagram for the Hunza Flush Floor Light showing a 104mm flange and 137.5mm body height
Hunza Pure LED Flush Washer Recessed in stainless steel, front view of a round bezel around a black half lensSide angle view of the Hunza Flush Washer Recessed with a polished steel ring and a black cylindrical body
Hunza Pure LED Flush Floor Light Square in stainless steel, seen from above with a ringed LED lens in a round insertDimension diagram for the Hunza Flush Floor Light Square showing a 110mm square plate and 137.5mm deep body
Hunza Pure LED Driveway Light in stainless steel, seen from above with the flange and recessed LEDOrnate wrought iron entrance gate between stone piers, uplit by ground lights at night
Hunza Flush Floor Light GU10 in copper, top view of the round face with a halogen lamp at the centreDimension diagram for the Hunza Flush Floor Light showing 104mm flange, 83mm body and 137.5mm depth
Hunza Flush Floor Light Square GU10 in stainless steel, a round brushed insert with the lamp in a square plateDimension diagram for the Hunza Flush Floor Light showing the 110mm flange, 83mm body and 137.5mm overall depth
Hunza Flush Floor Light in stainless steel, top down studio shot of the round face and lampDimension diagram for the Hunza Flush Floor Light showing 104mm flange, 83mm body and 137.5mm depth
Hunza Driveway Light in solid bronze, top down studio shot showing the bronze flange, black powder coated aluminium body and MR16 lamp fittedRecessed Hunza driveway light uplighting a line of trees at night, Moonlight Design garden lighting project
Hunza Flush Floor Light Square in stainless steel, top down studio shot of a round insert set within a square plateDimension diagram for the Hunza Flush Floor Light Square showing 110mm plate, 83mm body and 137.5mm depth
Hunza Flush Floor Light in solid copper, seen from above on a white background with the lamp in the centreDimension diagram for the Hunza Flush Floor Light showing 104mm flange, 83mm body and 137.5mm depth
Hunza Driveway Light in stainless steel, top down studio shot showing the steel flange, black powder coated aluminium body and MR16 lamp fittedCountry house driveway and front garden lit at night by recessed Hunza driveway lights, Moonlight Design garden lighting project photographed by Joanna Kossak
Hunza Driveway Light GU10 in solid bronze, top down studio shot showing the bronze flange, black powder coated aluminium body and GU10 lamp fittedHunza driveway light uplighting a tree at night, Moonlight Design garden lighting project
Collingwood 193mm tilt adjustable RGBW ground light shown on a plain white studio background, a top down view of the round brushed 316 stainless steel bezel and the cluster of individually lensed LEDs, with the finned anodised aluminium body visible extending below.
Collingwood Tilt 165mm RGBW ground light in profile on a white studio background, showing the brushed 316 stainless steel bezel and recessed glass lens with the cluster of coloured LED emitters visible, set above the finned anodised aluminium body and side cable gland.
Collingwood Tilt Adjustable 223mm RGBW ground light in stainless steel, studio cutaway shot showing the round brushed steel bezel with countersunk fixing screws, the ring of LED chips beneath the lens, and the black finned aluminium body with a cable gland on the side.
Collingwood Tilt 147mm RGBW ground light in stainless steel, angled studio shot on a white background showing the round brushed steel bezel with four fixing screws and the central lens, above the black finned anodised aluminium body with its side mounted cable gland connector.

A drive over light is built to take the weight of a car passing directly over it, set flush into a driveway or parking area where a standard ground light wouldn't be rated to cope.

Tilt adjustable and fixed drive over designs

Collingwood's Tilt Adjustable range covers 119mm, 147mm and 223mm cut out sizes, in stainless steel, with mains dimmable and colour changing RGBW options available. Fabula's Capworth offers a surface mounted alternative in dark grey for locations where a recessed cut out isn't practical.

Good to know

  • Always confirm a fitting is specifically rated for drive over use before installing it anywhere vehicles will pass, since not every ground light is built to the same load rating.
  • All outdoor electrical installation should be carried out by a qualified electrician.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo