Hunza Flush Floor Light Square GU10 - Stainless Steel - Mains

Mains Powered Light, Level With the Ground

This is the mains version of the Hunza square flush floor light. It is built to sit level with a path, hotel floor or building foyer, and because it runs straight from the mains there is no transformer to hide. The flush lens sheds water and keeps dirt from collecting on the glass, and nothing stands proud for anyone to trip on.

Solid Stainless With a Lasting Finish

Marine grade 316 stainless steel forms the canister and the square flange. It holds a steady brushed look in the weather, although some environments can leave a light surface tarnish that a regular wash will clear. The warranty is 10 years.

How It Works

• It takes a GU10 lamp, which is not supplied. A Hunza approved GU10 LED lamp is needed to maintain the IP rating and warranty.
• Runs on mains power with no driver or transformer required, and is wired in parallel.
• The canister is included and measures 83mm across by 137.5mm long, set into an 83mm cut out.
• The flange is 110mm wide and only 9mm deep.
• Walk on it freely, or drive over it at up to 10km/h (6 mph) with vehicles up to 1500kg (3300lb).
• IP67 rated.

Where It Works Best

• Along garden paths and patios where you want a clean, flat finish
• In foyers, hotel floors and commercial entrances
• Across private drives within the speed and weight limits
• Wherever a mains supply is already in place and you want to avoid low voltage cabling

Planned and Fitted by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows photographs of our own finished schemes and explains how we plan and draw up each one. Visit it if you would like us to lay out the lighting for your path or entrance.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• No lamp is included. Use a Hunza approved GU10 LED to keep the warranty.
• Mains voltage, so it must be wired by a qualified electrician.
• Stainless steel can show a light surface tarnish in some settings, and washing keeps it clean.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Does this version need a transformer?
No. It is a mains fitting and needs no driver or transformer.

Which lamp should I fit?
It takes a GU10 lamp, and to keep the IP rating and 10 year warranty it should be a Hunza approved LED.

Is the canister included?
Yes. The canister is included for easy installation and needs an 83mm cut out.

Can a car drive over it?
Yes, at up to 10km/h (6 mph) and for vehicles up to 1500kg (3300lb).

Canister
Diameter: 83mm
Length: 137.5mm

Flange
Width: 110mm
Depth: 9mm
(refer to spec for more information)

• Hunza MR16 and GU10 Flush Floor Lite Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.