Hunza Pure LED Flush Floor Light - Stainless Steel - Low Voltage

A Round Floor Light You Can Drive Over

The Hunza Pure LED Flush Floor Light is made to sit level with a path, a hotel floor or a building foyer, with no lip to catch a shoe. Its flush fit lens stops water pooling and dirt settling on the glass, and the whole fitting can be walked on or driven over. The canister is included, which makes the install more straightforward. This is the round, low voltage version with the LED chip built in.

Brushed Stainless Steel for Hard Wearing Spots

Made from marine grade 316 stainless steel, this fitting suits places that see regular wear, such as driveways and entrance paving. It keeps a consistent brushed look rather than ageing in colour. Stainless can show a light surface tarnish in some environments, and regular washing keeps it tidy. A solid copper version is also made for those who prefer a warm, changing finish.

How It Works

• Maximum drive over speed is 10km/h (6 mph) and maximum vehicle weight is 1500kg (3300lb).
• Cree LED chip delivering 600 lumens from 6 watts, CRI 90 or more at 3000K, with serviceable parts.
• Select 2200K, 2700K, 3000K or 4000K, a beam of 15, 25, 38 or 60 degrees, and a clear or frosted lens.
• Canister 83mm in diameter and 137.5mm long, with a 104mm flange 9mm deep. Cut out size 83mm. 1m of cable included.
• Wired in series on low voltage, so it needs a remote LED driver, sold separately.
• Can be dimmed with a suitable dimmable driver.
• IP67 rated, with a 10 year warranty and 5 years on the LED.

Where It Works Best

• Set into driveways and courtyard entrances where vehicles pass slowly
• Along pathways, flush with the paving
• In hotel forecourts, foyers and other commercial entrances
• Beside a front door, to light a wall or planter from below

Our Lighting Design Service

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. Photographs of our own completed schemes are on the Design Service page, where you can also see how we plan, draw up and install a project with NICEIC registered electricians. Come and take a look if you want a scheme drawn up for your own space.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if unused, uninstalled and in the original packaging.
• The canister is included.
• A remote LED driver is needed and sold separately. Wiring is in series.
• Drive over limits apply: 10km/h and 1500kg maximum.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can cars drive over this light?
Yes, slowly. The maximum drive over speed is 10km/h (6 mph) and the maximum vehicle weight is 1500kg (3300lb).

Is the canister included?
Yes. The canister is supplied with the fitting for easy installation.

Why is the lens flush with the surface?
A flush fit lens stops water pooling and dirt collecting on it, and leaves no lip to trip over.

What size hole do I need?
The cut out size is 83mm, which matches the canister diameter.

Canister
Diameter: 83mm
Length: 137.5mm

Flange
Diameter: 104mm
Depth: 9mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Flush Floor Light Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.