Hunza Flush Floor Light Square - Stainless Steel - Low Voltage

A Floor Light You Can Walk and Drive Over

The Hunza Flush Floor Light Square is made to sit level with a pathway, hotel floor or building foyer, so there is no lip to catch a foot. The lens is flush fitted, which stops water pooling on it and dirt settling on the glass. This low voltage version is made in marine grade 316 stainless steel and a GU10 mains version of the same fitting is also available.

Brushed 316 Stainless Steel

The body and flange are solid 316 stainless steel, a good match for paving, decking and entrance floors that see regular weather and foot traffic. The finish stays consistent over time, though in some environments it can pick up a light surface tarnish. Washing it down now and then keeps that in check. Hunza backs the fitting with a 10 year warranty.

How It Works

• A square flange, 110mm wide and 9mm deep, sits flush with the surface and hides the canister below.
• The canister is included for easy installation. It measures 83mm in diameter and 137.5mm long, so you need a cut out of 83mm.
• Supplied with 1m of cable.
• Drive over speed should not exceed 10km/h (6 mph), with a maximum vehicle weight of 1500kg (3300lb).
• Rated IP67 and wired in parallel.
• The fitting is not supplied with a lamp. To keep the IP rating and warranty it must use a Hunza approved MR16 LED lamp, bought separately.
• Low voltage, so it also needs a transformer.

Where It Works Best

• Set into paths and terraces where an upstanding light would be in the way
• In building foyers, hotel entrances and courtyards that people walk across
• On driveways, within the weight and speed limits above
• Anywhere you want light coming from the floor without a lip or visible fixing

Planning Your Scheme With Us

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. The project photographs on our Design Service page are our own completed schemes, and they show how we plan a layout, draw it up and install it. Take a look if you would like help placing floor lights along a path or entrance.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The lamp is sold separately and must be Hunza approved to keep the IP rating and warranty.
• A transformer is needed for the low voltage supply.
• Stainless steel can acquire a light surface tarnish in some environments. Regular washing keeps it looking its best.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can this floor light be driven over?
Yes. It can be driven over at up to 10km/h (6 mph) by vehicles weighing up to 1500kg (3300lb).

Does the lamp come with it?
No. The lamp is bought separately and must be a Hunza approved LED to maintain the IP rating and warranty.

What size hole does it need?
The canister is 83mm in diameter, so the cut out size is 83mm. The canister is included.

Does it need a transformer?
Yes. It is a low voltage fitting, so it needs a transformer, which is sold separately.

Canister
Diameter: 83mm
Length: 137.5mm

Flange
Width: 110mm
Depth: 9mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza MR16 and GU10 Flush Floor Lite Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.