Outdoor Lights

Outdoor Lights

Outdoor lights cover every fixture built to withstand UK weather, from wall mounted and lantern style fittings to freestanding lamp posts, bollards, ground lights and spike lights for borders and beds. Our range spans low voltage garden lighting systems run from a single transformer through to straight to mains fittings for permanent installations, with weatherproof housings suited to fully exposed, covered or even underwater locations. Specialist brands include Hunza and LuxR for hand assembled New Zealand engineering, Collingwood and SLV for LED downlights, floodlights and outdoor spotlighting, and Lumena for solar and mains powered bollards and spike lights. Norlys brings Scandinavian styled wall lanterns, while Moretti Luce and Bover add a more design led Italian and Spanish edge, from cast brass lanterns to hand woven outdoor pendants and floor lamps. Styles run from minimalist stainless steel and anthracite designs to traditional cast and painted lanterns, with LED, GU10 and colour changing RGBW options throughout. Popular applications include security and motion sensor lighting, garden and landscape lighting, and patio and deck lighting, giving you everything needed to light paths, driveways, entrances and outdoor living spaces from a single collection.

Filters

Sort by:

123 products

Collingwood FL01 black floodlight shown from above, with the round wall mounting plate and pivot bolt on its adjustable bracket arm.Collingwood FL01 black floodlight angled upward on its adjustable bracket, showing the wall mounting plate and pivot bolt at the base.
Collingwood FL02 black PIR floodlight mounted on its bracket, angled view showing the wall plate, adjustable arm and motion sensor unit below the light headCollingwood FL02 black PIR floodlight on its base plate, front on view showing the floodlight head, adjustable stem and PIR sensor housing to the side
Collingwood WL220 LED wall light in bronze, angled studio shot showing the round wall plate and the cylindrical head tilted to one side, with the LED lamp visible inside the lens.Collingwood WL220 LED wall light in bronze, front on studio shot looking directly into the lens of the tilted head, showing the anodised aluminium finish and integrated LED lamp.
Angled studio shot of the Collingwood 119mm tilt adjustable ground light, showing the round stainless steel bezel with two fixing screws, a recessed tinted lens, and the finned anodised aluminium body below with its cable entry point.
Collingwood GL038 SPS ground light in antique brass, straight down view showing the round flange and central LED lensCollingwood GL038 SPS ground light in antique brass, angled view showing the recessed body, mounting bracket and Collingwood Lighting brand mark
Collingwood WL340 stainless steel step light, front on studio shot showing the brushed circular flange, embossed Collingwood logo above the lens, and the half moon frosted glass diffuser.Collingwood WL340 stainless steel step light viewed from a low angle, showing the depth of the brushed steel flange and the recessed frosted lens strip that casts the asymmetric beam.
Collingwood BL01 wooden LED bollards shown in three timber and top options: a dark Sapele finish with a domed top, a pale Oak finish with a flat chamfered top, and a medium Iroko finish with a pointed top, each with the angled light head near the top and cable entry holes visible at the base.
Collingwood BL03 wooden LED bollard shown in three finishes side by side, from left to right a dark reddish brown wood with a rounded domed head, a pale blond wood with a square flat cut head, and a mid brown wood with an angled chamfered head, each with the LED recessed into the neck of the fitting
Collingwood UY2 gel filled connector, close up studio shot on a white background showing the translucent plastic housing, cable entry sleeve and amber pressure cap that seals the joint.
Collingwood Tilt Adjustable 147mm ground light in stainless steel, studio shot at an angle showing the round brushed bezel with recessed fixing screws on top and the finned black anodised aluminium body with the tilt adjustment knob below.
Round recessed ground light shot at a raised angle on a plain white studio background, showing a brushed stainless steel bezel with two countersunk fixing screws, a dark recessed well holding a tilted lens block with three small clear LED optics, and a ribbed black plastic body underneath with a side cable entry.
Collingwood GL090RGBW ground light in stainless steel, top down view showing the frosted lens and brushed steel bezel with the Collingwood name stamped into the rimCollingwood GL090RGBW ground light viewed from the side, showing the stainless steel bezel with spring clip fixings and the deep aluminium heat sink body beneath
Collingwood GL016RGBW ground light in stainless steel seen from above, showing the brushed round bezel, frosted glass lens and Collingwood brandingCollingwood GL016RGBW ground light at an angle showing the recessed stainless steel body, spring loaded fixing clips and 316 stainless steel marking
Collingwood LUXI 290 up and down wall light in anthracite, studio shot showing the cylindrical cast aluminium body, the frosted lower lens and the rear wall plate with cable and fixing pointsCollingwood LUXI 290 style up and down wall lights installed along a covered exterior walkway in daylight, mounted between doorways under a timber slatted ceiling
Collingwood Halo wall light in anthracite grey, angled view showing the circular LED ring lit and the microwave sensor cutout on the side of the housingCollingwood Halo wall light in anthracite grey, side profile showing the domed lens and the illuminated halo ring around its edge
Collingwood WL342 antique brass step light, angled studio shot of the square brass faceplate with bevelled edge and half moon shaped asymmetric lensCollingwood WL342 antique brass step light viewed from the side and rear, showing the round recessed body behind the faceplate and the mounting bracket with fixing screws
Collingwood WL339 stainless steel cast finish step light, front on studio shot of the round textured flange with the fixing screw and asymmetric lens slot visibleCollingwood WL339 step light at an angle, showing the recessed cylindrical body, mounting tabs either side and the glass lens strip set into the cast stainless steel flange
Collingwood WL075 wall light in bronze, angled studio shot on a white background showing the round wall plate embossed with the Collingwood C logo, the flared forward housing and the circular lens at its base.
Collingwood WL220 copper wall light, three quarter angle view, brushed copper cylindrical spotlight head tilted upward on its round wall plate, clear lens over the lamp visible, plain white studio background.Collingwood WL220 copper wall light, straight on view with the cylindrical head facing the camera, brushed copper finish and lamp lens visible, plain white studio background.
Collingwood FL01 black floodlight viewed from above at an angle, showing the adjustable wall mounting bracket, the rectangular LED lens with the Collingwood C logo, and the square PIR sensor unit mounted below on its own swivel joint.Collingwood FL01 black floodlight viewed face on from a lower angle, showing the flat lens front, the hinged wall bracket to the rear, and the PIR motion sensor head angled outward on its ball joint mount.
Collingwood TR2818 Wi-Fi to RF transmitter, plain studio shot on a white background. The black metal case sits at an angle showing two long black antennas standing upright, one with its gold SMA connector visible. The front panel is printed with the model number TR2818, terminal wiring markings, CE and RoHS certification symbols, and a small screw terminal block and status lights are visible at the base, with a keyhole mounting bracket underneath for fixing the unit to a wall or cabinet.
Collingwood WL340 asymmetric step light in antique brass, plan view from above showing the round brushed brass bezel and the crescent shaped lens set off centre, plain white studio background.Collingwood WL340 antique brass step light viewed from the side, showing the depth of the round housing, the frosted asymmetric lens and the stainless steel spring fixing clip used to secure it in a cut out.
Collingwood UL030RGBW stainless steel spotlight, studio shot on white background, three quarter view showing the three LED emitters behind the frosted lens, ribbed brushed steel barrel and square base fixing plate with pivot bolt.Collingwood UL030RGBW stainless steel spotlight standing upright on its square fixing plate on a grey and white studio backdrop, three quarter angle with soft cast shadow, showing the knurled ribbed housing.
Collingwood 193mm tilt adjustable RGBW ground light shown on a plain white studio background, a top down view of the round brushed 316 stainless steel bezel and the cluster of individually lensed LEDs, with the finned anodised aluminium body visible extending below.
Collingwood 165mm Tilt Adjustable ground light in stainless steel, studio shot of the recessed fitting sitting above ground showing the round brushed stainless steel bezel with evenly spaced countersunk fixing screws, the black finned anodised aluminium body below, and the small tilt adjustment knob set into the side of the housing.
Collingwood WL070RGBW up and down wall light in silver anodised aluminium, three quarter angle studio shot showing the pinched hourglass housing, circular wall mounting plate, and the clear lens over the upper LED module.Collingwood WL070RGBW up and down wall light in silver anodised aluminium, straight on studio shot against a white background showing the hourglass shaped body with a light source at each end.
Collingwood Salvus Max emergency bulkhead photographed at an angle from above on a plain white studio background, showing the clear ribbed prismatic lens over a dense grid of small surface mounted LEDs, metal spring catches clipped around the rim and three round knockout blanks moulded into the side of the white polycarbonate housing.Lower three quarter studio view of the Collingwood Salvus Max emergency bulkhead on a plain white background, showing the depth of the pale grey and white polycarbonate base, a small round test button on the front face and the clear prismatic lens seated above the illuminated LED board.
Collingwood Tilt 165mm RGBW ground light in profile on a white studio background, showing the brushed 316 stainless steel bezel and recessed glass lens with the cluster of coloured LED emitters visible, set above the finned anodised aluminium body and side cable gland.
Collingwood Tilt Adjustable 223mm RGBW ground light in stainless steel, studio cutaway shot showing the round brushed steel bezel with countersunk fixing screws, the ring of LED chips beneath the lens, and the black finned aluminium body with a cable gland on the side.
Studio product shot of the Collingwood Tilt Adjustable 193mm ground light on a plain white background, showing the round brushed stainless steel bezel with its three visible fixing screws, the dark recessed lens tilted slightly to demonstrate the adjustable beam, and the finned black anodised aluminium body below with the side mounted tilt adjustment slot visible.
Collingwood Tilt 147mm RGBW ground light in stainless steel, angled studio shot on a white background showing the round brushed steel bezel with four fixing screws and the central lens, above the black finned anodised aluminium body with its side mounted cable gland connector.
Studio shot on a white background of the Collingwood tilt adjustable ground light, angled to show the round 316 stainless steel bezel with its mounting screw holes, the tilted LED lens recessed inside, and the ribbed black anodised aluminium body with adjustment tab below.
Collingwood SL220 LED spike light in copper, angled studio shot showing the tilted lamp head and brushed copper spike on a plain white background.Collingwood SL220 LED spike light in copper, studio shot from the same angle as the previous image showing the tilted head and spike on a plain white background.
Collingwood SL220 mains LED spike light in black anodised aluminium, studio shot on a plain white background showing the cylindrical head tilted forward with the recessed lens and reflector visible, and the upper section of the slim black stem below it.Collingwood SL220 black LED spike light on a plain white background, a near identical repeat of the previous studio angle, showing the tilted cylindrical head, the dark bezel ring around the lens and the narrow black stem.
Collingwood SL220 spike light photographed against a plain white studio background, its brushed stainless steel cylindrical head tilted forward on a slim round stem, clear faceted lens visible behind the front bezel, stem running out of the bottom of the frame.Second studio view of the Collingwood SL220 stainless steel spike light in identical framing to the first shot, showing the tilted satin steel barrel, the knurled bezel ring and the exposed lens on a white background.
Collingwood SL220 mains spike light in a bronze anodised finish on a plain white studio background, shown at a three quarter angle with the cylindrical head tipped forward to reveal the clear lens, the faceted reflector behind it and a slim gold toned ring, with the top of the slim round stem running down below.Bronze Collingwood SL220 spike light on plain white, framed at the same three quarter angle as the previous shot, the tilted head and the upper part of the round stem visible and the matt warm brown anodised surface catching a soft studio highlight.

Designs from the Outdoor Lighting Experts

Outdoor lighting is both our specialism and our passion here at Moonlight Design. Using our expertise and creative vision, we have curated an extensive selection of both traditional and modern outdoor lighting styles for you to choose from, allowing you to create your ideal outdoor space. Whether you’re seeking traditional lantern styles in bronze and brass finishes or something sleek and contemporary in chrome and glass, our latest outdoor lighting range has something to suit every taste and every aesthetic. And with an extensive selection of LED lighting options to choose from, you can ensure your outside lighting is both powerful and energy-efficient while remaining robust enough to withstand weather and temperature changes.

Outside Lighting for All Applications

Our collection includes lighting designs for all outdoor applications, allowing you to illuminate any and all of your outdoor spaces to your precise requirements. From security lights to keep your premises safe and secure, to subtle deck lights for adding ambience to your seating areas and decorative garden lights to illuminate your green spaces, there’s a light for every need here at Moonlight Design.

We're Proud To Offer