Outdoor Lighting Accessories

Outdoor Lighting Accessories

Behind every outdoor lighting scheme is a set of drivers, transformers and installation parts that matter just as much as the fittings themselves. Collingwood's constant current LED drivers, rated IP20 or IP65, cover outputs from 1W to 36W, some with mains dimming, while Hunza's buriable transformers are built to be installed below ground alongside a low voltage circuit. Glare guards and ground light installation tubes round out the range for a clean, professional finish. Always match a driver's output to your fittings, and use a qualified electrician for installation.
Bulbs for Outdoor Use
Colour Changing LED Lights
Outdoor Table and Floor Lamps
Remote Controls

Filters

Sort by:

202 products

Hunza Ultra 50 Glare Guard in black powder coat, an angled hood around a round lens, seen from aboveDimension diagram for the Hunza Ultra 50 Glare Guard showing a 90mm height
Hunza Ultra 50 Glare Guard - Powder Coat Sale price£75.00 inc. VAT
Hunza Hex Cell Louvre Adaptor in stainless steel with a red silicone seal ring and black honeycomb louvre, seen from aboveDimension diagram for the Hunza Hex Cell Louvre Adaptor showing a 63.5mm diameter and 11mm height
Hunza Hex Cell Louvre Adaptor - Stainless Steel Sale price£78.00 inc. VAT
Hunza Hex Cell Louvre Adaptor in copper, viewed from above showing the honeycomb louvre and red seal ringDimension diagram for the Hunza Hex Cell Louvre Adaptor showing 63.5mm diameter and 11mm height
Hunza Hex Cell Louvre Adaptor - Copper Sale price£63.00 inc. VAT
Collingwood Wall Mounted Photocell Kit, side profile studio shot on a white background, showing the black wall mounting bracket with a clear domed polycarbonate photocell sensor head on top and its internal terminal components visible through the translucent cover.
Collingwood Wall Mounted Photocell Kit Sale price£14.27 inc. VAT
Collingwood LSD12024 120W LED driver in a white plastic housing, shown at an angle with the terminal connections and rating label visible on one end
Collingwood LSD12024 Driver (replacement of the PS10024) Sale price£37.61 inc. VAT
Collingwood end cap for the SM7 surface mount profile, grey ABS, studio shot showing the closed top with no cable holeTechnical dimension diagram of the Collingwood SM7 end cap showing overall size of 24.2mm by 8mm and the oval cable hole cutout used on the cable hole version
Collingwood End Cap for SM7 Surface Mount Profile Sale priceFrom £1.61 inc. VAT
Collingwood CCDRV75DALI 200W DALI dimmable driver, angled studio shot of the silver aluminium enclosure showing the digital display, product label and cable entry knockouts.
Collingwood CCDRV75DALI 200W CV Colour Change DALI Dimmable Driver Sale price£118.31 inc. VAT
Mean Well LCM-40DA DALI LED driver in a white and blue case with mounting clips, on a white background
DALI LCM-40DA Driver IP20 Sale price£88.80 inc. VAT
Norlys Corner Bracket 4 - BlackNorlys Corner Bracket 4 - Black, close up of the black textured bracket plate with two screw holes
Norlys Corner Bracket 4 - Black Sale price£57.00 inc. VAT
Collingwood angled double wall bracket in brushed 316 stainless steel, showing the two angled mounting faces each with a fixing hole for an MF02 IP or MS02 IP fitting
Collingwood Angled Double Bracket for MF02 IP & MS02 IP - Stainless Steel 316 Sale price£30.94 inc. VAT
Steinel corner wall mount for XLED Home 2 in silver grey plastic, studio shot showing the open ribbed back
Steinel Corner wall mount XLED home 2 Silver Sale price£24.21 inc. VAT
Hunza ST150 Ultra Glare Shield, a black oval ring with an angled cut away opening, on a white background
Hunza ST150 Ultra Glare Shield Sale price£23.00 inc. VAT
Hunza Ultra 50 Hex Cell louvre insert with a black honeycomb grid and clear clip in base
Hunza Ultra 50 Hex Cell Sale price£44.00 inc. VAT
Collingwood WL95 bulkhead light fitted with the white eyelid accessory, angled studio shot on a plain white background showing the solid opaque top half of the eyelid and the frosted lens visible across the bottom half.
Collingwood WL95 Eyelid for Bulkhead (Optional Accessory) - White Sale price£8.44 inc. VAT
Steinel XLED Home 2 corner wall mount in black plastic, studio shot on white background
Steinel Corner wall mount XLED home 2 Black Sale price£22.45 inc. VAT
Steinel corner wall mount for XLED Home 2 in graphite, studio shot on white backgroundSteinel corner wall mount for XLED Home 2 in graphite fitted on the corner of a grey wall
Steinel Corner wall mount XLED home 2 graphite Sale price£24.21 inc. VAT
Steinel corner wall mount LS 150 LED in black, front view studio shot with two fixing wingsSteinel corner wall mount LS 150 LED in black plastic, studio shot, second view
Steinel Corner wall mount LS 150 LED Black Sale price£21.46 inc. VAT
Steinel corner wall mount for XLED Home 2 in white plastic, studio shot on white backgroundSteinel corner wall mount for XLED Home 2 in white, fixed on an outside wall corner between two grey surfaces
Steinel Corner wall mount XLED home 2 White Sale price£22.45 inc. VAT
Steinel Corner Wall Mount 07 in black plastic, studio shot of the front with slots and fixing recessesSteinel Corner Wall Mount 07 in black plastic, studio shot, second view
Steinel Corner wall mount 07 Black Sale price£22.05 inc. VAT
Steinel Corner Wall Mount 07 white plastic corner bracket with cable and screw cut outs, studio shotSteinel Corner Wall Mount 07 white plastic corner bracket, studio shot - view 2
Steinel Corner wall mount 07 White Sale price£22.05 inc. VAT
Steinel LS 150 LED corner wall mount in white plastic, studio shot of the front plate and angled side armsSteinel LS 150 LED corner wall mount in white, studio shot, second view slightly lower
Steinel Corner wall mount for LS 150 LED White Sale price£21.46 inc. VAT
Steinel NightMatic 2000 white photocell controller, angled studio shot showing light sensor and IP54 markingSteinel NightMatic 2000 white photocell controller, close-up of the light sensor, Steinel logo and lower cover screws
Steinel NightMatic 2000 photo-cell controller - White Sale price£39.38 inc. VAT
Stone Globe Time Sensor for Plug and Play Stone Globes, black timer unit with red display, arrow buttons and cable
Stone Globe Time Sensor for Plug & Play Stone Globes Sale price£45.00 inc. VAT
Orluna N-300 300mA non dimmable LED driver, 12W output
Orluna N-300 Non-Dimmable Driver - 300mA 12W Sale price£19.66 inc. VAT
Orluna L-0-20 1 to 10V dimmable LED driver, 24V DC 20W
Orluna L-0-20 1-10V Dimmable Driver - 24V DC 20W Sale price£37.94 inc. VAT
Orluna L-D-50 Dali dimmable LED driver, 24V DC 50W
Orluna L-D-50 Dali Dimmable Driver - 24V DC 50W Sale price£75.89 inc. VAT
Orluna L-D-80 Dali dimmable LED driver, 24V DC 80W
Orluna L-D-80 Dali Dimmable Driver - 24V DC 80W Sale price£126.48 inc. VAT
Orluna L-0-60 1 to 10V dimmable LED driver, 24V DC 60W
Orluna L-0-60 1-10V Dimmable Driver - 24V DC 60W Sale price£69.56 inc. VAT
Orluna D-120 EldoLED Dali dimmable LED driver, 120mA 20W
Orluna D-120 EldoLED Dali Dimmable Driver - 120mA 20W Sale price£64.58 inc. VAT
Orluna D-300-1 EldoLED Dali dimmable LED driver, 300mA 20W
Orluna D-300-1 EldoLED Dali Dimmable Driver - 300mA 20W Sale price£64.58 inc. VAT
Orluna D-100 EldoLED Dali dimmable LED driver, 100mA 20W
Orluna D-100 EldoLED Dali Dimmable Driver - 100mA 20W Sale price£64.58 inc. VAT
Stone Globe main cable connector for plug and play globes, black clamp with screw cap fixed on a cable, white background
Stone Globe Main Cable Connector for Plug & Play Stone Globes Sale price£15.50 inc. VAT
Orluna 0-100 EldoLED 0 to 10V dimmable LED driver, 100mA 20W
Orluna 0-100 EldoLED 0-10V Dimmable Driver - 100mA 20W Sale price£64.58 inc. VAT
Stone Globe 10m Plug and Play Cable Pack, coiled black cable with a round connector on the end
Stone Globe 10m Plug & Play Cable Pack for Stone Globes Sale price£37.50 inc. VAT
Hunza Tree Mount Kit domed black mount plate with screw holes and threaded centre, on whiteDimension diagram for the Hunza Tree Mount Kit showing 106mm width and 34mm height
Hunza Tree Mount Kit (Screw Fix) Sale price£39.00 inc. VAT
Wiska EC308 earthing clamp in brass with two round openings and three slotted fixing screws
Wiska Earthing Clamp Kit EC308 Sale price£10.00 inc. VAT

Behind every well specified outdoor lighting scheme is a set of drivers, transformers and installation parts that never get seen once the job is finished but matter just as much as the fittings themselves. This collection covers the technical accessories that keep an outdoor lighting installation running properly.

Drivers and transformers

Collingwood's range of constant current LED drivers, including the DRV150700 and DRV350700TD, are rated IP20 or IP65 depending on the model and cover outputs from 1W up to 36W, with some versions offering mains dimming. Hunza's buriable transformers are built specifically to be installed below ground alongside low voltage garden lighting circuits.

Installation accessories

Beyond drivers, this collection also includes glare guards to soften the beam of a spike or spot light, and ground light installation tubes for a clean, professional recessed fitting.

Good to know

  • Always match a driver's output current and wattage to the exact fittings it will power, and have all outdoor electrical installation carried out by a qualified electrician.
Low garden path lights lining a gravel walkway to a gazebo at dusk
Path Lights
Outdoor lighting collection at Moonlight Design, garden wall lights and pathway lights at dusk
Outdoor Lighting
Chandelier Lights
Table Lamps
Pendant Lights
Island Pendant Lights

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo

5-Star Service

Fast, reliable, and always helpful—our friendly team is here to support you every step of the way.

Technical Expertise

With 20+ years of experience, we offer trusted advice and reliable solutions you can count on.

Competitive Pricing

Great value without compromise—competitive prices on quality products, every time.

Design Service

Since 2003, our experts have delivered dynamic lighting designs and professional installations that transform spaces.