Orluna D-120 EldoLED Dali Dimmable Driver - 120mA 20W

Orluna D-120 EldoLED Driver

The Orluna D-120 is an EldoLED built Dali dimmable driver rated at 120 milliamps and 20W, sitting between the D-100 and D-300-1 in Orluna's Dali EldoLED range.

Matching This Driver To Your Fitting

Dali dimming is digital and addressable, so the D-120 can be individually addressed, grouped and scene set from a Dali controller rather than driven from a single analogue dimming line. As with every Orluna driver, confirm the D-120's current and protocol against your specific luminaire's driver compatibility before installing.

How It Works

Supplying a constant 120 milliamps at up to 20W, the D-120 is built to standard constant current practice for LED engines wired in series, with dimming carried out entirely through the Dali digital protocol. Its EldoLED engine brings the same industry recognised strength in precision, flicker free dimming found across Orluna's EldoLED range.

Where It Works Best

The D-120 suits Orluna fittings whose LED engine draws a little more current than the 100mA D-100 requires, without stepping up to the 300mA of the D-300-1, all while retaining Dali's digital addressing for scene setting or centralised control. Where analogue 0 to 10V dimming is preferred instead, the equivalent 0-120 carries the same current rating.

Made By Orluna

Founded in 1973 by aeronautical engineers who applied then unusual LED technology to problems of efficiency and mechanical reliability, Orluna has carried that engineering discipline into every generation of product since, control gear included. A driver like the D-120 is specified with that same rigour, expected to perform consistently over the working life of the fitting.

Good To Know

• Output: 120mA constant current
• Power: up to 20W
• Dimming protocol: Dali digital addressable
• Driver: EldoLED engineered
• Compatibility: confirm against your specific Orluna luminaire before ordering

Questions People Ask

Q: What makes the D-120 different from the D-100?
A: The D-120 supplies 120mA rather than 100mA, for Orluna fittings specified with the higher current LED engine.

Q: Does the D-120 support scene setting?
A: Yes, as a Dali driver it can be addressed individually and included in grouped or scene set control.

Q: Is there a 0 to 10V version of the D-120?
A: Yes, the 0-120 shares the same 120mA and 20W rating but dims via 0 to 10V analogue control instead of Dali.

160mm length x 42mm width x 31mm depth

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.