Orluna L-0-60 1-10V Dimmable Driver - 24V DC 60W

Orluna L-0-60 Driver

The Orluna L-0-60 is a 1 to 10V dimmable driver from Orluna's own L series, with a fixed 24V DC output rated at 60W, built for constant voltage LED loads rather than the constant current EldoLED units elsewhere in the range.

Matching This Driver To Your Fitting

Dimming is via the 1 to 10V analogue protocol, a close relation of 0 to 10V control though typically without a full off signal from the dimming line itself, so switching is usually handled separately. Check the L-0-60 against the driver compatibility of your specific Orluna fitting before installing, since fixed voltage drivers are matched to particular loads.

How It Works

The L-0-60 outputs a fixed 24V DC at up to 60W, positioning it as a constant voltage driver, in line with standard practice for 24V DC LED loads such as tape or multi point arrays rather than a single current fed engine. Dimming performance is governed by the 1 to 10V analogue protocol, with output varying in line with the control voltage supplied.

Where It Works Best

With a 60W ceiling, the L-0-60 sits above the 20W L-0-20 in Orluna's 1 to 10V L series, suited to larger 24V DC loads or multiple light points run from a single driver where more power is needed. Where digital, addressable Dali control is preferred instead, the equivalent 24V DC units in the L-D range offer that alternative.

Made By Orluna

Today Orluna supplies projects internationally while remaining a British designed and manufactured business, with families such as One, Cero, Curve, Origin, Fade and Vio built around the same principle, precision engineering and long term reliability over the cheapest component on paper. Fixed voltage drivers such as the L-0-60 are specified to that same standard for the fittings they power.

Good To Know

• Output voltage: 24V DC fixed
• Power: up to 60W
• Dimming protocol: 1 to 10V analogue
• Driver line: Orluna L series
• Compatibility: confirm against your specific Orluna luminaire before ordering

Questions People Ask

Q: What load is the L-0-60 designed for?
A: It is a constant voltage driver with a fixed 24V DC output up to 60W, suited to 24V DC LED loads such as tape or multi point arrays.

Q: How does 1 to 10V dimming differ from 0 to 10V?
A: Both are analogue protocols, but 1 to 10V typically does not provide a full off signal from the dimming line itself, so a separate switching arrangement is usually needed.

Q: Is there a lower power version of the L-0-60?
A: Yes, the L-0-20 shares the same 24V DC output and 1 to 10V protocol at a lower 20W rating.

26mm height x 203mm length x 43mm width

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.