Orluna L-0-20 1-10V Dimmable Driver - 24V DC 20W

Orluna L-0-20 Driver

The Orluna L-0-20 is a 1 to 10V dimmable driver from Orluna's own L series, with a fixed 24V DC output rated at 20W, the smallest capacity unit in the L series covered here.

Matching This Driver To Your Fitting

Dimming is via the 1 to 10V analogue protocol, closely related to 0 to 10V control but generally without a full off signal on the dimming line itself, so a separate switching arrangement is typically required. As with every Orluna driver, check the L-0-20 against your specific fitting's driver compatibility before installing.

How It Works

The L-0-20 supplies a fixed 24V DC at up to 20W, operating as a constant voltage driver suited to smaller 24V DC LED loads rather than a current fed engine. Output is controlled through the 1 to 10V analogue protocol, varying in proportion to the control voltage applied.

Where It Works Best

At 20W, the L-0-20 is the lightest duty option in Orluna's 1 to 10V L series, suited to smaller 24V DC loads or single light points where the 60W L-0-60 would be more capacity than needed. Where digital, addressable Dali control is required instead, the equivalent 24V DC L-D units offer that alternative at similar power points.

Made By Orluna

Orluna was founded in 1973 by aeronautical engineers and repositioned in 2009 under Andrew Kilborn toward the high end architectural market, a combination of engineering discipline and design ambition that still runs through every product, control gear included. Even a smaller driver like the L-0-20 is built to the same long term reliability standard as the rest of the range.

Good To Know

• Output voltage: 24V DC fixed
• Power: up to 20W
• Dimming protocol: 1 to 10V analogue
• Driver line: Orluna L series
• Compatibility: confirm against your specific Orluna luminaire before ordering

Questions People Ask

Q: What load is the L-0-20 suited to?
A: It is a constant voltage driver with a fixed 24V DC output up to 20W, suited to smaller 24V DC LED loads.

Q: Does the L-0-20 provide a full off signal?
A: As a 1 to 10V driver it typically does not provide full off from the dimming line alone, so switching is usually handled separately.

Q: Is there a higher power version of the L-0-20?
A: Yes, the L-0-60 shares the same 24V DC output and 1 to 10V protocol at a higher 60W rating.

25mm height x 178mm length x 43mm width

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.