Orluna D-100 EldoLED Dali Dimmable Driver - 100mA 20W

Orluna D-100 EldoLED Driver

The Orluna D-100 is an EldoLED built Dali dimmable driver rated at 100 milliamps and 20W, the entry point in Orluna's Dali EldoLED range for digitally controlled installations.

Matching This Driver To Your Fitting

Dali is a digital, addressable dimming protocol, allowing each luminaire to be individually addressed, grouped and scene set from a Dali controller rather than relying on a single analogue dimming line. Because Dali addressing and current rating both need to match the fitting, confirm the D-100 is the correct driver for your chosen Orluna luminaire before installing.

How It Works

Running at a constant 100 milliamps up to 20W, the D-100 follows standard constant current practice for series wired LED engines, with all dimming handled digitally through the Dali protocol rather than by varying an analogue voltage. As an EldoLED unit it carries EldoLED's recognised reputation for precision dimming and flicker free performance at low light levels, a detail that matters most once a scheme is dimmed rather than run at full output.

Where It Works Best

The D-100 is suited to Orluna fittings with a lower current LED engine where digital, addressable control is required, such as schemes with scene setting or centralised Dali management. It is the digital counterpart to the analogue 0-100, sharing the same 100mA and 20W rating but suited to installations built around a Dali control system rather than a single 0 to 10V dimming line.

Made By Orluna

Many Orluna fittings are built to be modular, with drivers, LED engines, lenses and reflectors designed to be replaced individually rather than the whole luminaire discarded, a philosophy that underpins Orluna's 20 year spares and repair programme. A driver such as the D-100 is part of that same thinking, specified as a component that can be serviced and renewed over the long life of the fitting.

Good To Know

• Output: 100mA constant current
• Power: up to 20W
• Dimming protocol: Dali digital addressable
• Driver: EldoLED engineered
• Compatibility: confirm against your specific Orluna luminaire before ordering

Questions People Ask

Q: What does Dali dimming mean for the D-100?
A: Dali is a digital, addressable protocol, so the D-100 can be individually addressed, grouped and scene set from a Dali controller rather than a single analogue dimming line.

Q: How does the D-100 differ from the 0-100?
A: Both supply 100mA at up to 20W, but the D-100 dims digitally via Dali while the 0-100 dims via a 0 to 10V analogue signal.

Q: Can the D-100 be used in a scene setting installation?
A: Yes, Dali's addressable nature makes it well suited to scenes and grouped control, subject to confirming compatibility with your Orluna luminaire.

160mm length x 42mm width x 31mm depth

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.