Outdoor Lighting Accessories

Outdoor Lighting Accessories

Behind every outdoor lighting scheme is a set of drivers, transformers and installation parts that matter just as much as the fittings themselves. Collingwood's constant current LED drivers, rated IP20 or IP65, cover outputs from 1W to 36W, some with mains dimming, while Hunza's buriable transformers are built to be installed below ground alongside a low voltage circuit. Glare guards and ground light installation tubes round out the range for a clean, professional finish. Always match a driver's output to your fittings, and use a qualified electrician for installation.
Bulbs for Outdoor Use
Colour Changing LED Lights
Outdoor Table and Floor Lamps
Remote Controls

Filters

Sort by:

202 products

Hunza Flange Mount base in black powder coat with a round plate and screw holes at the foot of a poleLine drawing of the Hunza flange mount plate in perspective, showing three screw holes and a central socket
Hunza Flange Mount - Powder Coat Sale price£55.00 inc. VAT
Hunza Flange Mount in brushed stainless steel, a short round tube on a circular base plate with screw holes
Hunza Flange Mount - Stainless Steel Sale price£86.00 inc. VAT
Hunza Flange Mount in solid copper, round base plate with a copper tube rising from it on a white backgroundLine drawing of the Hunza Flange Mount from above showing the round plate, four screw holes and central collar
Hunza Flange Mount - Copper Sale price£143.00 inc. VAT
Harte Large 250mm Foundation Frame Square, galvanised steel frame with four threaded bars and nuts, studio shot
Harte Large 250mm Foundation Frame Square - Galvanised Steel with 4 Threaded Bars Sale price£125.00 inc. VAT
Harte Small 100mm Square Foundation Frame, galvanised steel frame with four threaded bars, studio shot
Harte Small 100mm Square Foundation Frame - Galvanised Steel with 4 Threaded Bars Sale price£90.00 inc. VAT
Collingwood PIRBOLTDIMR remote shown at a tilted angle on a plain white studio background. A slim flat white plastic keypad with soft grey button panels, small blue key legends and one solid blue ON key in the corner.Studio shot of the Collingwood PIRBOLTDIMR remote lying beside the white Salvus PIR bolt on sensor. The sensor shows its dark domed PIR lens on an angled swivel head, a smooth white moulded body and a threaded M20 entry at the rear. The sensor is not included with this remote.
Collingwood Remote Control for PIRBOLTDIM Sale price£8.48 inc. VAT
Collingwood Salvus bolt on PIR sensor shown at a three quarter angle on a plain white studio background. The white moulded body curves up at one end into a raised neck holding a faceted segmented lens dome, two small rotary adjustment dials marked TIME and LUX sit on the flat upper face, and the rear ends in a hex collar and a threaded male M20 spigot.Flat side on studio photograph of the white Collingwood Salvus bolt on PIR sensor against a plain white background, showing the full profile from the round segmented PIR lens at the left, across the two screwdriver adjustable dials labelled LUX and TIME, to the hex nut and ribbed threaded M20 spigot at the right.
Collingwood Salvus Bolt-On PIR Sensor Sale price£42.39 inc. VAT
Collingwood Salvus Bolt-On Dimmable PIR Sensor photographed at a three quarter angle on a plain white studio background. The white polycarbonate body is a long tapered wedge with a smooth satin surface, the faceted PIR dome lens sits in a raised collar at the lower left end, and the threaded M20 spigot with its grey locking nut is visible at the upper right end.Side profile studio shot of the Collingwood Salvus Bolt-On Dimmable PIR Sensor on a plain white background. The flat white polycarbonate housing runs horizontally, with the circular faceted PIR lens in its raised ring at the left and the white threaded M20 spigot and grey clamping nut at the right.
Collingwood Salvus Bolt-On Dimmable PIR Sensor Sale price£46.63 inc. VAT
Small white plastic Collingwood control unit shot at a three quarter angle on a plain white studio background, low and rounded like a pebble, with a modular signal socket and a round DC power jack set into the front edge. No buttons, no wall plate and no fixing screws are visible.
Collingwood RF-Wifi Wall Control Plate for Collingwood Colour Change Lights Sale price£102.53 inc. VAT
Collingwood SM28 anodised aluminium end cap shown from two angles: the inner face with its small locating tab on the left, and the outer curved face with two fixing screw holes on the right, both in a silver anodised finish.
Collingwood End cap for SM28 Surface Mount Profile Sale price£4.21 inc. VAT
White ABS end cap for Collingwood CO7 corner profile, angled 45 degree shape with a pre punched oval cable hole in the centre
Collingwood End Cap for CO7 Surface Mount Corner Profile Sale price£6.06 inc. VAT
Collingwood CCDRV100DALI 100W DALI dimmable driver, white plastic housing shown at an angle with screw terminal blocks at each end, a small digital display and certification markings visible on the label
Collingwood CCDRV100DALI 100W CV Colour Change DALI Dimmable Driver Sale price£157.74 inc. VAT
Collingwood CCDRV200DMX 200W constant voltage DMX driver, angled studio shot of the silver metal enclosure showing the digital status display and CCDRV200DMX label
Collingwood CCDRV200DMX 200W CV Colour Change DMX Driver Sale price£220.84 inc. VAT
Angled product shot of the Collingwood LED cove clip, a silver metal L shaped bracket with a curved top lip and two pre drilled screw holes in its flat base, on a white background.
Collingwood LED COVE CLIP Sale price£2.37 inc. VAT
Collingwood CCDRV100RF 100W RF colour change driver, white plastic housing shown at an angle, with input and output terminal connectors on the left and the model label and certification marks on the right
Collingwood CCDRV100RF 100W CV Colour Change RF Driver Sale price£157.74 inc. VAT
Collingwood CCDRV100DMX 100W DMX512 driver, white plastic housing shown at an angle with digital display, control buttons and terminal connectors visible, and product label printed with input and output specifications.
Collingwood CCDRV100DMX 100W CV Colour Change DMX Driver Sale price£157.74 inc. VAT
Collingwood CCDRV200RF 200W RF colour change driver, angled studio shot of the rectangular metal enclosure showing the CCDRV200RF product label, terminal connection blocks at each end and mounting flanges
Collingwood CCDRV200RF 200W CV Colour Change RF Driver Sale price£220.84 inc. VAT
Collingwood Bolt-On Emergency Converter in white polycarbonate, showing the self-test LED indicator on one end and the threaded M20 bolt fitting on the other
Collingwood Bolt-On Emergency Converter - Open Area Lens - Self-Test Sale price£51.44 inc. VAT
Collingwood 28mm deep surface mount aluminium profile shown at an angle with the frosted plastic diffuser clipped in place, forming one smooth line of light along the channel.Collingwood 28mm deep surface mount profile with the frosted diffuser strip laid alongside the empty anodised aluminium channel, showing the deep box section and mounting flanges.
Collingwood 28mm Deep Surface Mount Profile & Diffuser Sale priceFrom £63.52 inc. VAT
DALI LCM-60DA LED driver in a white case with a blue terminal cover, shown at an angle on white
DALI LCM-60DA Driver Sale price£93.00 inc. VAT
Collingwood DRV3001050 LED driver, angled product photo showing the printed label with input and output voltage ratings, the DIP switch current setting table, and SELV and CE markings.Technical line diagram of the Collingwood DRV3001050 driver showing its case dimensions of 160mm length, 43mm height and 30mm depth.
Collingwood DRV3001050 42W CC Driver IP20 350mA-1050mA Dip-Switch Sale price£20.60 inc. VAT
Angled studio shot on a plain white background of a slim cream coloured moulded LED driver, with a dense printed specification label and DIP switch selection table across the top face, moulded cooling ribs at one end and a small flat lug at each cornerPlain line drawing dimension diagram on a white background showing the driver in side profile and plan view, labelled 123mm long, 22mm high and 79mm wide
Collingwood PSDIM700 50W Constant Current IP20 Driver - 1-10V Dimmable Sale price£85.47 inc. VAT

Behind every well specified outdoor lighting scheme is a set of drivers, transformers and installation parts that never get seen once the job is finished but matter just as much as the fittings themselves. This collection covers the technical accessories that keep an outdoor lighting installation running properly.

Drivers and transformers

Collingwood's range of constant current LED drivers, including the DRV150700 and DRV350700TD, are rated IP20 or IP65 depending on the model and cover outputs from 1W up to 36W, with some versions offering mains dimming. Hunza's buriable transformers are built specifically to be installed below ground alongside low voltage garden lighting circuits.

Installation accessories

Beyond drivers, this collection also includes glare guards to soften the beam of a spike or spot light, and ground light installation tubes for a clean, professional recessed fitting.

Good to know

  • Always match a driver's output current and wattage to the exact fittings it will power, and have all outdoor electrical installation carried out by a qualified electrician.
Low garden path lights lining a gravel walkway to a gazebo at dusk
Path Lights
Outdoor lighting collection at Moonlight Design, garden wall lights and pathway lights at dusk
Outdoor Lighting
Chandelier Lights
Table Lamps
Pendant Lights
Island Pendant Lights

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo

5-Star Service

Fast, reliable, and always helpful—our friendly team is here to support you every step of the way.

Technical Expertise

With 20+ years of experience, we offer trusted advice and reliable solutions you can count on.

Competitive Pricing

Great value without compromise—competitive prices on quality products, every time.

Design Service

Since 2003, our experts have delivered dynamic lighting designs and professional installations that transform spaces.