Collingwood CCDRV200RF 200W CV Colour Change RF Driver

The Control Unit Behind Your Colour Changing Scheme

The CCDRV200RF is the driver that sits quietly out of sight, doing the work that makes a colour changing lighting scheme actually function. It has no light output of its own. It takes your mains supply and turns it into clean, controlled power for RGB or RGBW LED fittings and strip, sold separately, with an RF receiver built right in.

What You're Getting: 200W CV RF Colour Change Driver

• Constant voltage output at either 12V or 24V DC, selectable to match your fittings
• Four independent channels, each rated up to 4.1A
• 8.4A combined output across all channels, giving 200W total
• Built in RF receiver, no separate receiver module needed
• Compact enclosure at 330mm length, 79mm width and 39mm depth

How It Works

Mains power goes in one end, and regulated low voltage DC comes out the other, split across four channels to drive the red, green, blue and (if used) white elements of your fittings. Because the RF receiver is built into the driver, a compatible RF remote or wall control talks to it directly. There's no extra box to find space for behind a panel or in a loft void.

Where It's Installed

• Behind coving, bulkheads or false ceilings feeding RGB or RGBW strip runs
• In a plant room or accessible void serving a bar, kitchen island or feature wall
• As the control hub for a single zone RF colour changing setup
• Alongside Collingwood's PR3002 power repeater when a scheme spans multiple zones and you need the colour changes synchronised across a bigger installation

About Collingwood Lighting

Collingwood Lighting designs and manufactures its LED products from Sywell in Northamptonshire, and has specialised in LED technology since 2002. The brand says it was among the first to bring mains dimmable LED products to the UK electrical wholesale market, and control gear like this driver sits at the heart of that same expertise, giving installers a dependable way to run colour changing and dimming schemes. Collingwood has also been awarded a Gold medal by EcoVadis, placing it in the top 5% of companies assessed globally for sustainability.

Good to Know

• 5 year manufacturer warranty
• IP20 rated, so it's built for dry indoor installation only, not for bathrooms, outdoor spaces or damp locations
• Class I construction, so it needs a proper earth connection as part of the installation
• Supports dimming as well as colour changing, depending on your chosen controller
• Moonlight Design recommends installation by a registered NICEIC electrician, as this driver connects directly to your mains supply

Questions People Ask

Does this driver come with its own RF receiver?
Yes. The RF receiver is built into the driver itself, so you don't need a separate receiver module wired in alongside it.

Can I run RGBW fittings as well as RGB from this driver?
Yes. The CCDRV200RF is designed to power either RGB or RGBW LED fittings and strip, so it works whichever colour system your fittings use.

What's the maximum load per channel?
Each of the four channels handles up to 4.1A, with a combined total of 8.4A across all channels, giving 200W overall.

Can this driver be installed outdoors?
No. It's IP20 rated, which means it's designed for dry indoor installation only.

Do I need anything extra for a multi zone installation?
For RF setups spanning multiple zones where you want the colour changes synchronised across a bigger scheme, Collingwood's PR3002 power repeater is used alongside this driver.

330mm length x 79mm width x 39mm depth

• Collingwood Driver Guide 2025
• Collingwood Colour Change Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.