Hunza Pure LED Wall Spot Stainless Steel Low Voltage

An integrated LED spotlight in a finish that holds its look

The Hunza Pure LED Wall Spot keeps the same fully adjustable arm as the standard Wall Spot, 360 degree rotation and 0 to 90 degree elevation, with the LED built into the fitting. This version is solid stainless steel and runs on low voltage.

The stainless steel finish

316 grade stainless steel, the marine specification Hunza uses across its solid metal range, chosen for a consistent brushed look rather than the weathering copper undergoes. Hunza notes it may develop a light surface tarnish in some conditions, which washing resolves.

How It Works

The LED sits inside the fitting rather than as a replaceable lamp, with parts Hunza describes as serviceable. Choose colour temperature, beam angle and lens when ordering: 2200K, 2700K, 3000K or 4000K, 15, 25, 38 or 60 degrees, clear or frosted. The head measures 63.5mm in diameter and 75mm long, with a 45mm arm and a 78mm diameter, 28mm deep wall base, supplied with a 1 metre cable, and runs at 600 lumens from 6 watts. It must be installed in series with a remote driver.

Where It Works Best

Suited to single features, a specimen tree, sculpture, or architectural detail, particularly where you want a finish that will not change tone over the years alongside an integrated LED.

Our Experience With Hunza

We have worked with Hunza since Moonlight Design was founded in 2003, over 23 years across this range. The lifestyle photographs on this page are our own, taken on real installations rather than supplied as stock imagery, and show the kind of precise, directional pool of light this style of fixture produces once mounted and aimed.

Good To Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns: this fitting can be returned within 14 days of delivery if unused, uninstalled and in original packaging.
The LED is integrated, there is no separate lamp to buy or replace.
Must be installed in series with a remote driver, sold separately.
Check your colour temperature, beam angle and lens choice carefully before ordering, as these are made to order specifications.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

Will the stainless steel go rusty outdoors?
No, not under normal conditions. It is 316 marine grade, chosen specifically to resist corrosion, though it can pick up a light surface tarnish in some environments which a wash removes.

Can I change the LED colour temperature later?
No. Colour temperature, beam angle and lens are chosen at the point of ordering and built into the fitting, so they cannot be swapped afterwards.

What is the difference between this and the standard Wall Spot?
The standard Wall Spot takes a replaceable Hunza approved MR16 LED lamp. This PureLED version has the LED built permanently into the fitting, wired in series with a remote driver.

Is this fitting dimmable?
Yes, if it is run with a suitable dimmable driver, sold separately.