Hunza Pure LED Wall Spot Copper Low Voltage Spotlight

An integrated LED spotlight for precise, directional light

The Hunza Pure LED Wall Spot keeps the same fully adjustable arm as the standard Wall Spot, 360 degree rotation and 0 to 90 degree elevation, so you can aim the beam exactly where you want it. The difference is the light source: the LED is built into the fitting rather than a replaceable lamp. This version is solid copper and runs on low voltage.

The copper finish

The head and wall plate are solid copper, not plated, so they weather and darken outdoors over time, developing a deeper tone and, in some settings, a green verdigris. Hunza designs the finish to age this way. The short pivot connecting the head to the wall plate is brass, standard across the range.

How It Works

The LED chip sits inside the fitting, so there is no lamp to source or replace, though Hunza notes the parts are serviceable. At the point of ordering you choose colour temperature, beam angle and lens: 2200K, 2700K, 3000K or 4000K, in 15, 25, 38 or 60 degree beam angles, clear or frosted. The head measures 63.5mm in diameter and 75mm long, with a 45mm arm and a 78mm diameter, 28mm deep wall base, supplied with a 1 metre cable. It runs at 600 lumens from 6 watts, and PureLED low voltage fittings must be installed in series with a remote driver rather than the driver being built in.

Where It Works Best

Suited to the same single features as the standard Wall Spot: a specimen tree, a piece of sculpture, steps, or an architectural detail, where you want an integrated LED solution rather than a replaceable lamp.

Our Experience With Hunza

Moonlight Design has worked with Hunza since we were founded in 2003, over 23 years across their range. The lifestyle photographs on this page are our own, taken on real installations rather than supplied as stock imagery, and show the kind of pooled, directional light this style of fixture produces once mounted and aimed.

Good To Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns: this fitting can be returned within 14 days of delivery if unused, uninstalled and in original packaging.
The LED is integrated, there is no separate lamp to buy or replace.
Must be installed in series with a remote driver, sold separately.
Check your colour temperature, beam angle and lens choice carefully before ordering, as these are made to order specifications.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can I change the LED colour temperature later?
No. Colour temperature, beam angle and lens are all chosen at the point of ordering and built into the fitting, so they cannot be swapped afterwards the way a replaceable lamp could be.

What is the difference between this and the standard Wall Spot?
The standard Wall Spot takes a replaceable Hunza approved MR16 LED lamp. This PureLED version has the LED built permanently into the fitting, wired in series with a remote driver rather than a transformer.

How long before the copper changes colour?
It varies with local rainfall and air quality, but most copper Hunza fittings visibly darken within the first year or two outdoors and continue to deepen after that.

Is this fitting dimmable?
Yes, if it is run with a suitable dimmable driver. The driver itself is sold separately and needs to be dimmer compatible for this to work.