Hunza Twin Wall Spot, Stainless Steel

A Clean Stainless Wall Spot for Paths and Facades

Mount the Hunza Pure LED Twin Wall Spot on a wall and it gives you directional light for pathways and the structural elements of a building. It carries two spotlights that can be aimed in entirely different directions, so one fitting can cover a doorstep and a section of facade at the same time.

Marine Grade 316 Stainless Steel

The body is solid marine grade 316 stainless steel, with a consistent brushed finish. It can pick up a light surface tarnish in some environments, and washing it regularly keeps that under control. If you prefer a metal that changes with age, there is a solid copper version, and a powder coated aluminium one in several colours.

How It Works

Two heads, each turning 360 degrees and tilting from 0 to 90 degrees.
Cree LED, replaceable, with 600 lumens at 1050mA (6 watts) and CRI 90 or more at 3000K.
Choose 2200K, 2700K, 3000K or 4000K, a 15, 25, 38 or 60 degree beam, and a clear or frosted lens.
Heads are 63.5mm by 75mm, with 45mm arms, a 33mm by 146mm bar and a 78mm base that is 28mm deep. 1m of cable comes with it.
Low voltage, wired in series and fed by a remote LED driver that is sold separately.
Can be dimmed with a suitable dimmable driver.
IP66 rated, with a 10 year warranty and 5 years on the LED.

Where It Works

On a gable or side wall, lighting the path along the house
By a garage door, aimed at the drive
On a boundary wall, washing the planting in front of it
On a porch or outbuilding where you want shadow free light on the steps

Wall Lighting Schemes Through Moonlight Design

Hunza has been part of our range since 2003. Our team designs lighting schemes for gardens, supplies Hunza fittings and installs them in real gardens. The project photographs on our Design Service page show our own completed schemes, and how we plan, draw up and install them with NICEIC registered electricians. Please take a look if you would like a wall lighting plan for your own house.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
A remote LED driver is required, sold separately.
Stainless steel can show a light tarnish in some settings, and regular washing helps.
We recommend installation by a registered NICEIC electrician.