Hunza Twin Wall Spot, Copper | Moonlight Design

Two Directions of Light From One Wall Fixing

The Hunza Pure LED Twin Wall Spot is made to be mounted onto a wall and give directional light for pathways and the structural features of a building. Two independent spotlights share one base, so you can wash a path with one and graze a chimney, column or doorway with the other.

Solid Copper for Walls That Age Well

This wall spot is solid copper, not plated or painted, and it is made to weather. Bright and warm when new, it deepens to brown through the seasons and can turn a soft green, which looks natural against brick and stone. For a finish that stays the same, the stainless steel and powder coated aluminium versions are available.

Specification

Two heads, each rotating through 360 degrees and elevating from 0 to 90 degrees.
Replaceable Cree LED chip: 600 lumens at 1050mA (6 watts), CRI 90 or more at 3000K.
Available at 2200K, 2700K, 3000K or 4000K, with 15, 25, 38 or 60 degree beams and a clear or frosted lens.
Heads 63.5mm across and 75mm long, on 45mm arms from a 33mm diameter bar that is 146mm long, with a 78mm diameter base 28mm deep. 1m of cable is supplied.
Low voltage and series wired, so a remote LED driver is needed, sold separately.
Dimmable with a suitable dimmable driver.
IP66 rated, with a 10 year warranty and 5 years on the LED.

Where It Works Best

On the wall beside a front door, lighting the step and the path
Fixed to a garden wall to wash a terrace
Picking out a pillar, porch post or other architectural detail
Where you have a wall but no room for a ground spike or pole

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows project photographs of our own completed schemes and how we plan, draw up and install them. Visit it if you would like help deciding where on the wall to put them.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Solid copper patinas outdoors, which is normal and not a fault.
Needs a remote driver, sold separately.
We recommend installation by a registered NICEIC electrician.