Hunza Twin Pole Light, Stainless Steel

Crisp Stainless Light at Path Height

Two spotlights sit on top of an 850mm pole in the Hunza Pure LED Twin Pole Light, which is made for lighting paths and low foliage. Tilt the heads downward and the light stays low, with no vertical spill. You can also split them, sending one head along the path and the other into the planting.

316 Stainless Steel Finish

The metalwork here is solid marine grade 316 stainless steel with a consistent brushed finish. In some environments stainless can show a light surface tarnish, and washing it down regularly keeps it looking clean. Prefer something that changes character? The same light comes in solid copper, or in powder coated aluminium colours.

How It Is Built

Adjustable arms give each head 360 degrees of rotation and 0 to 90 degrees of elevation.
Cree LED, replaceable, delivering 600 lumens at 1050mA (6 watts) at a CRI of 90 or more at 3000K.
Order in 2200K, 2700K, 3000K or 4000K, with 15, 25, 38 or 60 degree beams and clear or frosted lenses.
Pole 38mm in diameter and 850mm long; each head body is 63.5mm by 75mm. A 1m cable is supplied.
Series wired low voltage, run from a remote LED driver that is sold separately.
Dimmable when you pair it with a suitable dimmable driver.
IP56/IP66 rated and covered by a 10 year warranty, with 5 years on the LED.

Where to Use It

Beside a front path or a garden walkway
At the front of a mixed border to light low planting
Near a patio edge, aimed down to avoid glare
Along a shared boundary where you want to keep light contained

Our Lighting Design Service

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza lights and install them in real gardens. Our Design Service page carries project photographs of our own completed schemes, and describes how we plan, draw up and install them with NICEIC registered electricians. If you want a second opinion on spacing, that is the place to begin.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
A remote LED driver is required and is not included.
Stainless steel can show light tarnish in some settings. Regular washing helps.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is this stainless steel or aluminium?
This version is made from marine grade 316 stainless steel.

Can the lights point in different directions?
Yes. Each head is set independently, so they can point in entirely different directions.

What IP rating does it have?
It is rated IP56/IP66.

Do I need an electrician?
We recommend installation by a registered NICEIC electrician, as the fitting is low voltage and wired in series to a remote driver.