Hunza Twin Bar Light, Stainless Steel

Two Lights, One Spike, Aimed Wherever You Need Them

The Hunza Pure LED Twin Bar Light puts two fully adjustable heads on a single cross bar and pushes into the ground on two spikes. You aim each head separately, so one can graze up a tree trunk while the other lights the planter beside it. It is a flexible, quietly useful fitting for almost any landscape lighting scheme.

Marine Grade 316 Stainless Steel

This version is made from marine grade 316 stainless steel, which keeps a consistent brushed look. In some environments it can pick up a light surface tarnish, and a regular wash keeps that in check. If you would like a finish that warms and changes over time, the same fitting is also made in solid copper, and in powder coated aluminium.

How It Works

Each head turns through 360 degrees and tilts from 0 to 90 degrees, so both can be set independently.
A replaceable Cree LED chip is built into each head, rated at 600 lumens at 1050mA (6 watts) with a CRI of 90 or more at 3000K.
Choose from 2200K, 2700K, 3000K or 4000K, and from 15, 25, 38 or 60 degree beam angles, with a clear or frosted lens.
Head bodies are 63.5mm across and 75mm long, on a 250mm bar with 150mm ground spikes. 1m of cable is supplied.
Low voltage and wired in series, so it needs a remote LED driver such as the Hunza 1050mA driver, sold separately.
Dimmable when paired with a suitable dimmable driver.
Rated IP66 with a 10 year warranty, and 5 years on the LED.

Where It Works Best

Uplighting shrubs, hedging and small trees in a border
Picking out a statue, urn or large planter
Washing a wall to illuminate a house sign or number
Anywhere you want two directions of light from one spot in the ground

Planning Your Scheme With Us

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. The project photographs on our Design Service page show our own finished schemes and how we plan, draw up and fit them with NICEIC registered electricians. Take a look there if you would like help placing lights like this one.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Needs a remote LED driver, sold separately, and the circuit should be planned in series.
Colour temperature, beam angle and lens are chosen when you order.
Parts are serviceable.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can I aim the two heads in different directions?
Yes. Each head rotates through 360 degrees and tilts from 0 to 90 degrees independently of the other.

How does it fix in the ground?
It is supplied with two 150mm spikes on a 250mm cross bar, so it pushes into soil or planting beds.

Does the stainless steel need looking after?
It is marine grade 316, but it can pick up a light surface tarnish in some environments, so an occasional wash helps.

Can I plug it straight into the mains?
No. This is the low voltage version, which needs a remote LED driver sold separately.