Hunza Adjustable Stake Spot in Copper

A Solid Copper Spot That Grows Into Its Setting

The copper Hunza Pure LED Stake Spot Adjustable goes into the ground on a 150mm stake and can be aimed at trees, sculpture, walls or planting. Because the head is adjustable you can fine tune the beam once it is in position. It is a low voltage spotlight, made from solid copper rather than a coated metal.

Bright When New, Mellow With Time

Solid copper is a natural finish that Hunza designs to weather and patina. It begins bright and warm, then deepens to brown and, given time, a soft green. Garden fittings in copper tend to settle into planting more gracefully than shiny ones, and each one ages a little differently. The shade shown online is only a guide, and swatches can be requested.

How It Works

Adjustable head for aiming the beam at features or planting.
Cree XHP-50-2 LED on a plug and play, field replaceable board, delivering 600 lumens at 1050mA (6 watts), about 100 lumens per watt, and a CRI of 90 or more at 3000K. Hunza quotes a life of 50,000 hours to L70.
Order in 2200K, 2700K, 3000K or 4000K, with a 15, 25, 38 or 60 degree beam and a clear or frosted lens.
The body is 62.5mm across and 74mm long, on a 150mm stake, with 1m of cable.
Low voltage and wired in series at 1050mA, requiring a remote constant current LED driver, sold separately.
Dimmable when paired with a suitable dimmable driver.
Rated IP66/IP67, with a 10 year warranty on the solid copper and 5 years on the LED electronics.
Hunza also makes a glare guard, hex cell louvre and snoot for this style of fitting. Ask us if you would like to add one.

Where It Works Best

Uplighting trees and large shrubs, where warm light flatters bark and foliage
Highlighting garden features, urns or sculpture
Throwing shadows across borders for depth and drama
Beside a path, as a low accent that does not dominate the view

Moonlight Design and Hunza

We have worked with Hunza since 2003. Moonlight Design designs lighting schemes for gardens, supplies Hunza fittings and installs them. The photographs on our Design Service page are our own completed schemes, and the page shows how we plan a layout, draw it up and install it with NICEIC registered electricians. Visit it to see how spot lights are placed in practice.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
You will need a remote LED driver, sold separately. Plan the series circuit before installation.
The LED board is field replaceable, so the light source can be serviced rather than the whole fitting replaced.
Copper will darken and patina outdoors. This is normal and not a fault.
We recommend installation by a registered NICEIC electrician.