Hunza Low Voltage Pole Light in Stainless

Marine Grade Stainless, Raised to Shine Down

Set at the top of an 850mm pole, the stainless steel Hunza Pure LED Single Pole Light puts its beam where you want it, over a path edge or across low planting. A fully adjustable arm lets the spotlight turn a full 360 degrees and tilt between 0 and 90 degrees, so it can even be angled right down to leave no light going upward. This version runs on low voltage.

A Brushed 316 Stainless Finish

The body is marine grade 316 stainless steel, a good choice for coastal and damp gardens. It keeps a consistent brushed look, although in some environments it can pick up a light surface tarnish. A regular wash is all it takes to keep that in check. Colours shown online are indicative only, and swatches are available on request.

How It Works

The arm rotates 360 degrees and elevates from 0 to 90 degrees, and the head can face downward to remove vertical light.
Integrated Cree LED chip, serviceable, producing 600 lumens at 1050mA (6 watts) with a CRI of 90 or more at 3000K.
Pick from 2200K, 2700K, 3000K or 4000K, four beam angles (15, 25, 38 and 60 degrees) and a clear or frosted lens.
Dimensions: body 63.5mm across and 75mm long, pole 38mm across and 850mm long, with 1m of cable attached.
Requires a remote LED driver, sold separately, and is wired in series.
Works with a suitable dimmable driver if you want to dim it.
IP56/IP66 rated, with a 10 year warranty and 5 years on the LED.

Where It Works Best

Lining a driveway or garden path where you want steady, low glare light
In planted beds, lighting the lower foliage from above
Around coastal or exposed gardens where a corrosion resistant finish matters
Beside a seating area, angled down so nothing shines into the eyes

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows photographs of our own finished schemes, along with how we plan the layout, draw it up and install it. If you would like help placing pole lights in your own garden, that page is the best place to begin.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Needs a remote driver, sold separately. Series wiring should be planned by your electrician.
Stainless steel can show a light surface tarnish in some settings. Washing it regularly keeps it looking clean.
We recommend installation by a registered NICEIC electrician.