Hunza Pure LED Sign Light Stainless Steel

Stainless Steel Light for Signs and Facades

Point it at a sign and the Hunza Pure LED Sign Light does the rest. A fully adjustable head sits on a 500mm arm, giving you a long reach from the wall to light signs, displays and building features from above or below. This is the low voltage edition, and the LED chip is built in.

316 Stainless Steel in a Brushed Finish

The housing is marine grade 316 stainless steel, a good choice for exposed and coastal walls. It holds a consistent brushed finish, although in some environments a light surface tarnish can develop. Washing it regularly keeps that in check. Copper and powder coated versions are made if you want a different look.

How It Works

Rotate the head a full 360 degrees and tilt it anywhere between 0 and 90 degrees.
A Cree LED chip delivers 600 lumens from 6 watts, CRI 90 or more at 3000K, with serviceable parts.
Order in 2200K, 2700K, 3000K or 4000K, with a 15, 25, 38 or 60 degree beam and a clear or frosted lens.
Head is 63.5mm across and 75mm long, with a 38mm diameter pole 500mm long and a 78mm base 28mm deep. 1m of cable is included.
It must be installed in series with a remote driver, which is sold separately.
Can be dimmed with a suitable dimmable driver.
IP66, a 10 year warranty and 5 years on the LED.

Where It Works Best

Commercial entrances and signage on modern buildings
Coastal homes and seaside businesses
Feature walls with a plaque or lettering
Gate pillars carrying a house name

Our Lighting Design Service

We have worked with Hunza since 2003. We design lighting schemes, supply Hunza fittings and install them. Our Design Service page has photographs of our own completed schemes and describes how we plan, draw up and install them with NICEIC registered electricians. Do visit if you would like us to look at your project.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Needs a remote driver and series wiring, so plan the circuit before installation.
Stainless steel may show a light surface tarnish in some environments. Regular washing helps.
We recommend installation by a registered NICEIC electrician.