Hunza Pillar Light in Stainless Steel

Up and Down Light in Stainless Steel

The Hunza Pure LED Pillar Light lights upwards and downwards from one fitting, which gives columns, gateway pillars and entrances a dramatic effect. This is the stainless steel version, with an integrated Cree LED chip at each end and serviceable parts. It runs on low voltage, wired to a remote driver.

Marine Grade 316 Stainless Steel

The cylinder is marine grade 316 stainless steel, with a brushed finish that stays consistent. It can pick up a light surface tarnish in some environments, and regular washing keeps it in check. For a finish that ages, the Pillar Light is also made in solid copper, and in powder coated aluminium.

How It Works

Light is thrown up and down, so one fitting lights the wall above and below.
Rated at 600 lumens from 6 watts, with a CRI of 90 or more at 3000K.
Choose a colour temperature (2200K, 2700K, 3000K or 4000K), a beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens.
Body diameter 63.5mm and length 139mm, with a 78mm diameter base 28mm deep and 1m of cable.
Low voltage and wired in series. The total fitting is 12vF, with individual ends at 6vF, so a remote driver is needed, sold separately.
Dimmable with a suitable dimmable driver.
IP66 rated, 10 year warranty, 5 years on the LED.

Where It Works Best

On rendered or painted gate piers, where steel suits a modern gate
Flanking a contemporary entrance, in a symmetrical pair
On a stone column at the end of a drive
On exposed or coastal sites where marine grade steel is a sensible choice

How We Plan and Install Hunza Lighting

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. The project photographs on our Design Service page show our own completed schemes, and how we plan a layout, draw it up and install it. If you want a scheme planned, or a second opinion on placing pillar lights, begin there.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
LED chips are integrated and serviceable.
Needs a remote LED driver, sold separately, and the circuit is wired in series, so plan it with your electrician.
Stainless steel can show a light surface tarnish in some environments, and regular washing keeps it in check.
We recommend installation by a registered NICEIC electrician.