Hunza Hanging Tree Light in Stainless

Stainless Steel Moonlighting for Trees and Pergolas

Hang the Hunza Pure LED Hanging Light from a high vantage point and it becomes a moon above the garden. This single spotlight is suited to trees, fences and overhangs, and its downward beam gives a soft, dynamic pool of light on whatever lies beneath. The low voltage version has its LED chip built in, so there is no lamp to buy.

A Brushed 316 Stainless Steel Body

The housing is marine grade 316 stainless steel, with a brushed finish that stays consistent through the seasons. In some environments it can show a light surface tarnish, and washing it now and then keeps it clean. It is a sensible choice where you want a modern, silver toned look. For a finish that ages instead, there are copper and powder coated options.

How It Works

3m of cable and 3m of stainless steel hanging wire are supplied as standard.
The Cree LED chip is rated at 600 lumens and 6 watts, with CRI 90 or more at 3000K, and has serviceable parts.
Colour temperature options are 2200K, 2700K, 3000K and 4000K, with beam angles of 15, 25, 38 and 60 degrees, and clear or frosted lenses.
Measures 63.5mm in diameter and 75mm in length.
Wired in series at low voltage, so a remote LED driver, sold separately, is needed.
Use a suitable dimmable driver and it can be dimmed.
IP66 rated with a 10 year warranty and a 5 year warranty on the LED.

Where It Works Best

Hanging from a bough to light a lawn or terrace below
On a fence or boundary beam, shining down along the line
Beneath a pergola roof or canopy
Above an outdoor dining table, as a subtle overhead light

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. The Design Service page shows photographs of our own completed lighting schemes and how we plan, draw up and install them with NICEIC registered electricians. Take a look if you would like a scheme planned for your garden.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns are accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
The LED is integrated and no separate lamp is needed.
Needs a remote driver, sold separately. The series circuit should be planned by your electrician.
Stainless steel may develop a light surface tarnish in some environments.
We recommend installation by a registered NICEIC electrician.