

Hunza Pure LED Brick Light Surface Mounted - Powder Coat - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Surface Mounted Wall Light When You Cannot Cut Into the Wall
Not every wall can take a recess. The surface mounted Hunza Pure LED Brick Light sits on the face of the wall as a neat rectangular box, so it works on a finished wall, a thin wall or a structure you would rather not cut into. It lights paths, walkways and steps from a low level, with the same four Cree LED chips on a field replaceable board used across the Brick range.
Choose Your Powder Coat Colour
The aluminium comes powder coated in Black, Bronze, Dark Grey, Olive Green, Silver Star, White, White Birch, Corten or Fine Silver. Because this version stands proud of the wall, the colour you pick is part of the look, so it is worth matching it to your render, brick or timber. Colours on screen vary, so ask us for a swatch. The Brick Light is also made in solid bronze and 316 stainless steel.
How It Works
- The box is 214mm wide, 94mm high and 63mm deep, with a 220mm by 100mm faceplate. It mounts on the surface of the wall, so there is no niche to build.
- Four Cree XHP 50 chips on a plug and play LED board that can be replaced in the field.
- 260 lumens at 350mA from 8.4 watts, 31 lumens per watt, CRI 90 or higher at 3000K, rated for 50,000 hours to L70.
- Colour temperatures of 2200K, 2700K, 3000K and 4000K.
- The lens is 10mm extra clear, low iron, shatter resistant glass with a lifetime warranty from Hunza.
- Low voltage, 350mA constant current and series wired, up to 24Vf. The constant current driver is not supplied.
- IP66 rated with a 5 year warranty on the aluminium and 5 years on the electronics. Do not pressure wash it.
Where It Works Best
- On existing walls where a recess is not practical
- Beside steps, ramps and entrances
- Along fences, boundary walls and retaining walls at low level
- Garden rooms and outbuildings with a path alongside
Planning Your Scheme With Us
At Moonlight Design we have worked with Hunza since 2003. We plan garden and path lighting, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows our own finished projects and explains how a scheme is planned, drawn up and installed, which helps when you are deciding spacing along a wall.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Brick Light is made to order, so it cannot be returned unless it is faulty or damaged.
- Needs a 350mA constant current driver, wired in series. The driver is not supplied, so ask us which one suits your layout.
- Do not pressure wash the fitting.
- Colours shown are for guidance only. Ask us for a swatch before ordering.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
How big is the surface mounted Brick Light?
The box is 214mm wide, 94mm high and 63mm deep, with a 220mm by 100mm faceplate.
Do I need to cut a hole in the wall?
No. This version sits on the surface of the wall. If you do want a flush fit, the recessed canister version sits into the wall behind its faceplate.
What do I need to run it?
A 350mA constant current driver wired in series. The driver is not included, and the fitting needs up to 24Vf and 8.4 watts.
Can I replace the LED?
Yes. The four Cree XHP 50 chips are on a plug and play board that Hunza designs to be replaced in the field.
What colours does it come in?
Black, Bronze, Dark Grey, Olive Green, Silver Star, White, White Birch, Corten and Fine Silver, in powder coated aluminium.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us












