

Hunza Pure LED Brick Light Recessed Canister - Powder Coat - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Low Level Recessed Brick Light for Garden Paths and Steps
The Hunza Pure LED Brick Light is a slim rectangular wall light made for low level lighting along paths, walkways and the edges of steps. This recessed canister version sets into the wall, so all you see is a 220mm by 100mm faceplate with a glowing opening, and the light lands on the ground where you walk. The Pure LED part means four Cree LED chips on a single board that can be replaced in the field, rather than a lamp you will keep having to buy.
Powder Coat Colours for Brick, Render and Timber
The faceplate is aluminium with a powder coat in your choice of nine colours: Black, Bronze, Dark Grey, Olive Green, Silver Star, White, White Birch, Corten and Fine Silver. Hunza makes it from high corrosion resistant aluminium with a chromate substrate under a UV resistant polyester powder coat. Colours on screen vary, so ask us for a swatch before you choose. Prefer a metal that ages naturally? The same light is made with a solid bronze or a 316 stainless steel faceplate.
How It Works
- Four Cree XHP 50 LED chips on a plug and play board that can be replaced in the field.
- 260 lumens at 350mA from 8.4 watts, which is 31 lumens per watt. CRI is 90 or higher at 3000K and the LED life is 50,000 hours to L70.
- Four colour temperatures are offered: 2200K, 2700K, 3000K and 4000K.
- The faceplate measures 220mm by 100mm. The canister behind it is 180mm long and 53mm deep, with 25mm conduit entries on the sides and the back.
- The lens is 10mm thick extra clear, low iron, shatter resistant glass, which Hunza gives a lifetime warranty.
- Low voltage, 350mA constant current, wired in series at up to 24Vf and 8.4 watts. The constant current driver is required and is not supplied.
- IP66 rated, with a 5 year warranty on the aluminium and 5 years on the electronics. Hunza says it must not be pressure washed.
Where It Works Best
- Set into a garden wall beside a path or walkway
- On the side wall of a flight of outdoor steps
- In a brick or stone wall along a driveway edge or entrance
- Along a patio or terrace wall where you want a low, gentle pool of light
Planning Your Scheme With Us
Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, paths and entrances, supply Hunza fittings and install them with NICEIC registered electricians. Photographs of our own finished projects are on the Design Service page, which also explains how we plan a layout, draw it up and fit it. It is a good place to start if you want help deciding where wall lights like this should go.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Brick Light is made to order, so it cannot be returned unless it is faulty or damaged.
- Needs a 350mA constant current driver, wired in series. The driver is not supplied, so ask us which one suits your layout.
- Do not pressure wash the fitting.
- Colours shown are for guidance only. Ask us for a swatch of the finish you want before ordering.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
What size is the recessed canister Brick Light?
The faceplate is 220mm wide and 100mm high. The canister that sits behind it in the wall is 180mm long and 53mm deep, with 25mm conduit entries on the sides and back.
Does the Brick Light come with a driver?
No. It runs on a 350mA constant current driver wired in series, and the driver is sold separately. The fitting takes up to 24Vf and 8.4 watts.
Which colour temperatures can I choose?
You can choose 2200K, 2700K, 3000K or 4000K. 2200K and 2700K are the warmest, and 4000K is the most neutral white.
Can I pressure wash a Brick Light?
No. Hunza states that the fitting must not be pressure washed or water blasted, even though it carries an IP66 rating.
What is the difference between the recessed canister and surface mounted versions?
The recessed canister fits into the wall behind the 220mm by 100mm faceplate. The surface mounted version is a box that sits on the face of the wall, 214mm wide, 94mm high and 63mm deep, so no recess is needed.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us












