

Hunza Pure LED Brick Light Surface Mounted - Solid Bronze - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Solid Bronze Box of Light for the Face of a Wall
This is the surface mounted Hunza Pure LED Brick Light with a solid bronze faceplate. A bronze front sits on a dark box 214mm wide, 94mm high and 63mm deep, so it can go straight onto a finished wall without any cutting in. It gives a low, controlled light for paths, walkways and steps, and the bronze gets better looking as the years go by.
Bronze That Develops Its Own Patina
Hunza machines the faceplate from LG2 bronze with a modified lead range and says it has high corrosion resistance and is not subject to dezincification. It darkens and patinas over time, and Hunza explains that this layer protects the metal underneath. For a finish that stays put, there are powder coated and 316 stainless steel versions of the same fitting.
How It Works
- Four Cree XHP 50 chips on a plug and play LED board that can be changed in the field.
- 260 lumens at 350mA from 8.4 watts, with CRI 90 or higher at 3000K and 50,000 hours to L70.
- Available in 2200K, 2700K, 3000K and 4000K.
- A 220mm by 100mm faceplate on a body 214mm wide, 94mm high and 63mm deep, fixed to the surface of the wall.
- 10mm extra clear, low iron, shatter resistant glass lens, with a lifetime warranty from Hunza.
- 350mA constant current, wired in series at up to 24Vf. The driver is required and not supplied.
- IP66 rated. The solid bronze carries a 10 year warranty and the electronics 5 years. Do not pressure wash it.
Where It Works Best
- Traditional brick and stone walls beside a path or porch
- Steps where you cannot recess a fitting
- Courtyards and walled gardens
- Walls that are already built and finished
Planning Your Scheme With Us
Moonlight Design has been working with Hunza since 2003. We design outdoor lighting schemes, supply the fittings and install them using NICEIC registered electricians. You can see our own completed projects and read how we plan and draw up a layout on the Design Service page. It is useful if you want advice on how far apart wall lights should be spaced.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Brick Light is made to order, so it cannot be returned unless it is faulty or damaged.
- Needs a 350mA constant current driver, wired in series. The driver is not supplied, so ask us which one suits your layout.
- The bronze will darken and patinate, so its colour will change over the years.
- Do not pressure wash the fitting.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
What is the faceplate made from?
Solid LG2 bronze, CNC machined. It has a 10 year warranty, and the electronics have 5 years.
Does it need a recess in the wall?
No. It is a surface mounted box, 214mm wide, 94mm high and 63mm deep, so it fixes to the face of the wall.
Will bronze rust?
Bronze does not rust. It darkens and develops a patina, which Hunza says helps protect the metal from further corrosion.
Is a driver included?
No. It needs a 350mA constant current driver, wired in series, sold separately.
Is there a recessed version in bronze?
Yes. The recessed canister version has the same solid bronze faceplate and sets into the wall.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us












