

Hunza Pure LED Brick Light Surface Mounted - Stainless Steel - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Stainless Steel Wall Light That Sits on the Surface
The surface mounted Hunza Pure LED Brick Light with a stainless steel faceplate is for walls that cannot be recessed. The brushed metal front sits on a dark box 214mm by 94mm and 63mm deep, and it throws a low, even light across paths, walkways and steps.
316 Stainless Steel, Machined by Hunza
The faceplate is machined from 316 stainless steel, which Hunza says has high corrosion resistance and a strong resistance to rust and abrasion. It is the finish to choose if you want a cool silver look that does not change much with age. For colour there is a powder coated version, and for a warmer metal there is a solid bronze version.
How It Works
- Four Cree XHP 50 LED chips on a field replaceable plug and play board.
- 260 lumens at 350mA from 8.4 watts. That is 31 lumens per watt, with CRI 90 or higher at 3000K, rated for 50,000 hours to L70.
- Choose from 2200K, 2700K, 3000K and 4000K.
- Body size 214mm wide by 94mm high by 63mm deep, with a 220mm by 100mm faceplate, fixed to the wall surface.
- The lens is 10mm extra clear, low iron, shatter resistant glass with a lifetime warranty from Hunza.
- Constant current at 350mA, wired in series, up to 24Vf. The driver is not supplied.
- IP66 rated, with a 10 year warranty on the stainless steel and 5 years on the electronics. Hunza says not to pressure wash it.
Where It Works Best
- Modern walls and cladding where clean metal suits the design
- Coastal or exposed positions that need a corrosion resistant finish
- Terraces and outdoor kitchens, where you want a low glow rather than a spotlight
- Existing walls where cutting a recess is not an option
Planning Your Scheme With Us
We have worked with Hunza at Moonlight Design since 2003. We design garden and exterior lighting schemes, supply Hunza fittings and install them with NICEIC registered electricians. The Design Service page has photographs of our own finished projects and a walk through of how a scheme is planned and drawn up, if you want guidance before you buy.
Good to Know
- Made to order, so please allow 3 to 4 weeks.
- Every Brick Light is made to order, so it cannot be returned unless it is faulty or damaged.
- Needs a 350mA constant current driver, wired in series. The driver is not supplied, so ask us which one suits your layout.
- Stainless steel can pick up a light surface tarnish in some environments, which a regular rinse with water keeps under control.
- Do not pressure wash the fitting.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
How far does the surface mounted Brick Light stick out from the wall?
The body is 63mm deep. It is 214mm wide and 94mm high, with a 220mm by 100mm faceplate.
What is the faceplate made from?
316 stainless steel, which Hunza describes as having high corrosion resistance and superior resistance against rust and abrasion.
How long is the warranty?
The stainless steel carries a 10 year warranty and the electronics 5 years. Hunza excludes third party lamps and power supplies.
Can the LED board be replaced?
Yes. The four Cree XHP 50 chips sit on a plug and play board that is replaceable in the field.
Is the surface mounted Brick Light waterproof?
It is IP66 rated. Hunza advises that it must not be pressure washed or water blasted.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us













