LuxR Modux 1 Twin Pole Light - Copper - Low Voltage

Two Adjustable Spot Heads on One Slim Ground Spike Pole

The LuxR Modux 1 Twin Pole Light carries two small ribbed spot heads on a single slim pole. One fitting in the ground can light two features, or one feature from two directions. The heads sit either side of a cross hub at the top of the pole and are adjustable, so you can aim the light exactly where you want it.

Solid Copper That Ages Naturally

This version is made in solid copper, with a warm reddish brown colour. Copper patinates over time, and the brand notes that this patina acts as a protective layer, so the colour will change gradually as the fitting weathers in the garden. The fitting uses pin mounted 1 watt Cree LEDs and draws 2 watts in total, which the brand states delivers around 320 lumens for the fitting, with a CRI of 90+. That is a gentle output, ideal for accent lighting rather than floodlighting.

Choose Your Beam, Colour and Lens

• Beam: 30º is a tight spot for a single feature, and 53º is a wider cone for a shrub or group of plants. 50+17º is a further beam option from the brand, so please contact us if you would like help choosing.
• Colour temperature: 2200K is a very warm glow, 2700K and 3000K are warm white, and 4000K is a crisper neutral white.
• Lens: clear glass gives the sharpest beam, and frosted glass softens its edges.

How It Works

Push the pole into the soil and aim the heads towards your subjects. The fitting runs on low voltage from a 350mA constant current driver, which is sold separately. A dimmable driver lets you dim the light. Custom pole lengths are available, and a flange mount can be supplied for fixing to a hard surface, so please contact us to discuss what you need.

Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.

Where It Works Best

Use it in a border to light two plants or a pair of features from one pole, beside a path or a patio, or to light a tree or sculpture from two sides. Copper suits natural planting, timber and brick. A glare guard can be added if you want tighter control of the light. Please contact us to check the right accessory for this fitting.

Good to Know

• Dimensions: 738mm overall height, 189.2mm across the heads, pole diameter 25.40mm, head diameter 30.95mm. Custom pole lengths are available on request, please contact us.
• Rated IP67 for protection against dust and water, so it is built for outdoor use.
• Warranty: 10 years on the copper, with 5 years on the LED and electronics.
• Returns are accepted as normal, unless the item is made to order.
• Made in New Zealand.
• Usually ships in 2 to 3 days. If out of stock, allow 3 to 5 weeks.

Questions People Ask

What is a twin pole light?

It is a ground spike pole with two adjustable spot heads at the top. You can aim each head at a different feature, or light the same feature from two sides.

How big is it?

The whole fitting is 738mm long from the tip of the spike to the top of the heads, and the heads span 189.2mm. The pole is 25.40mm in diameter. How much shows above ground depends on how deep you push it into the soil. Custom pole lengths are available, so please contact us if you need a different length.

Will the copper change colour?

Yes. Copper patinates over time, and the patina acts as a protective layer. The colour will gradually change as the fitting weathers.

How bright is it?

The fitting draws 2 watts, and the brand states it delivers around 320 lumens for the fitting. That suits subtle accent lighting.

Which beam angle should I choose?

Choose 30º to pick out one feature and 53º for a small shrub or a group of plants. If you are unsure, please contact us and we will help you choose.

Does it come with a driver?

No. It is a low voltage fitting that needs a suitable 350mA constant current driver, sold separately. A dimmable driver lets you dim the light. We recommend a registered electrician installs it.

Can I fix it to a hard surface?

The pole is designed to be pushed into the ground. A flange mount is available for hard surfaces, so please contact us to arrange it.

Overall height: 738mm (29")
Width across heads: 189.2 (7 1/2")
Pole diameter: 25.40mm (1")
Head diameter: 30.95mm (1 1/4")

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.