Hunza Pure LED Wall Spot Retro Stainless Steel Mains

An integrated LED spotlight for existing mains circuits

The Hunza Pure LED Wall Spot Retro has the same fully adjustable arm as the standard Wall Spot, 360 degree rotation and 0 to 90 degree elevation, with the LED built into the fitting. Retro describes how it wires in, onto an existing mains circuit, which suits replacing an older fitting without adding low voltage cable and a transformer. This version is solid 316 stainless steel.

The stainless steel finish

316 grade stainless steel, chosen for a consistent brushed finish that does not change character the way copper does, though it can develop a light surface tarnish in some conditions that regular washing keeps in check.

How It Works

The LED sits inside the fitting rather than as a separate lamp, with parts Hunza describes as serviceable. Choose colour temperature, beam angle and lens when ordering: 2200K, 2700K, 3000K or 4000K, 15, 25, 38 or 60 degrees, clear or frosted. The head measures 63.5mm in diameter and 75mm long, with a 45mm arm and a 78mm diameter, 55mm deep wall base, the extra depth housing the mains connection. It runs at 420 lumens from 4 watts, with the driver built into the fitting so no separate driver or transformer is needed.

Where It Works Best

Good for the same single features as the standard Wall Spot, and particularly suited to retrofit jobs where you are upgrading an existing mains fitting without wanting to rewire for low voltage.

Our Experience With Hunza

Moonlight Design has specified Hunza since 2003, over 23 years across the range. The lifestyle photographs on this page are our own, taken on real installations rather than supplied as stock imagery, and show the kind of precise, directional pool of light this style of fixture produces once mounted and aimed. The stainless steel PureLED Retro Wall Spot is a fitting we reach for on replacement jobs where the existing wiring is mains and staying that way.

Good To Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns: this fitting can be returned within 14 days of delivery if unused, uninstalled and in original packaging.
The LED is integrated, there is no separate lamp to buy or replace.
Runs on mains with the driver built in, no transformer required.
Check your colour temperature, beam angle and lens choice carefully before ordering, as these are made to order specifications.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

What does Retro mean on this fitting?
It refers to how it wires in, onto an existing mains circuit as a straightforward retrofit, rather than needing new low voltage cable and a transformer run out to it.

Will the stainless steel go rusty outdoors?
No, not under normal conditions. It is 316 marine grade, chosen specifically to resist corrosion, though it can pick up a light surface tarnish in some environments which a wash removes.

Can I change the LED colour temperature later?
No. Colour temperature, beam angle and lens are chosen at the point of ordering and built into the fitting, so they cannot be swapped afterwards.

Is this dimmable?
No. This mains PureLED Retro version is not dimmable. If dimming matters to your scheme, the low voltage PureLED Wall Spot can be dimmed with a suitable dimmable driver.