Hunza Pure LED Twin Wall Spot Retro

Two Spotlights, Two Directions, One Wall Fitting

The Hunza Pure LED Twin Wall Spot Retro puts two separate spotlights on a single wall mounted bar, and each head can be pointed somewhere different. One can graze a stone feature while the other picks out the path below. Each head turns through 360 degrees and tilts through 0 to 90 degrees of elevation. This mains version has its driver built in, so it connects straight to the mains supply and needs no remote driver.

Marine Grade 316 Stainless Steel

This version is made in marine grade 316 stainless steel, which gives it a clean, consistent brushed look that suits modern brick, render and stone. Stainless can pick up a light surface tarnish in some outdoor settings, and a regular wash keeps it looking sharp. If you want a finish that warms and changes with age, the same fitting is also made in solid copper, or in powder coated aluminium.

How It Works

Two heads, each with its own Cree LED chip, giving 420 lumens from 4 watts in total with a CRI of 90 or more at 3000K.
The LED chip is integrated and the parts are serviceable.
Choose your colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens when you order.
Each body is 63.5mm in diameter and 75mm long, on a 45mm arm, with a 146mm long bar 33mm in diameter. The base is 78mm in diameter and 55mm deep, supplied with 1m of cable.
Mains powered with the driver built in, and wired in parallel. Not dimmable.
Rated IP66 and backed by a 10 year warranty, with 5 years on the LED.

Where It Works Best

On a house or garden wall, lighting a path and a feature from one point
Beside steps, where one head can cover the treads and the other the wall
Along a boundary wall or outbuilding, to light two areas without two fittings
Over a seating area, aimed to cast light onto planting rather than into faces

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. The project photographs on our Design Service page show our own completed schemes, and how we plan, draw up and install them. Have a look to see what a finished scheme can look like.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Colours and finishes are for indication only, and swatches are available on request.
Stainless steel can show a light surface tarnish in some environments. Regular washing keeps it in check.
We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can the two heads point in different directions?
Yes. Each spotlight is fully adjustable, with 360 degrees of rotation and 0 to 90 degrees of elevation, so they can be aimed independently.

Do I need a separate driver?
No. This is the mains version, with the driver built in, so it does not need a remote driver.

Can I dim it?
No. The mains Retro version is not dimmable.

How well protected is it outdoors?
It is rated IP66 and made from marine grade 316 stainless steel, with a 10 year warranty and 5 years on the LED.