Hunza Twin Pole Light, Copper

A Low Pole Light in Solid Copper for Paths and Planting

The Hunza Pure LED Twin Pole Light stands on a slim 850mm pole with two spotlights at the top. It suits paths and low foliage, and because the heads can be tilted right down you can keep light on the ground and avoid sending it up into the sky or your neighbour's windows. Each head points where you choose, even in two completely different directions.

Copper That Mellows With Age

Made from solid copper, this fitting is designed to be left outdoors to weather. It begins bright and warm, then deepens to brown and in time can develop a soft green, as copper does on roofs and pipework. It is a natural process, not a defect. If you would rather the finish stayed as it is, the stainless steel and powder coated versions are the alternatives.

Specification at a Glance

Two heads with 360 degrees of rotation and 0 to 90 degrees of elevation on adjustable arms.
Replaceable Cree LED chip: 600 lumens at 1050mA (6 watts), CRI 90 or more at 3000K.
Pick 2200K, 2700K, 3000K or 4000K, a 15, 25, 38 or 60 degree beam and a clear or frosted lens.
Head bodies 63.5mm wide and 75mm long, on a 38mm diameter pole that is 850mm long, with 1m of cable.
Low voltage, series wired and driven by a remote LED driver, sold separately.
Dimmable if you use a suitable dimmable driver.
Rated IP56/IP66 with a 10 year warranty, 5 years on the LED.

Where It Works Best

Along a garden path, with the heads angled down for glare free light underfoot
In front of low shrubs and ground cover
Beside steps where you want soft, low level light
Along a driveway edge or bed boundary

Our Lighting Design Service

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. Our Design Service page shows project photographs of our own completed schemes and how we plan, draw up and install them with NICEIC registered electricians. Visit it if you would like a path or border lit properly from the start.

Good to Know

Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
Needs a remote LED driver, sold separately, with the circuit wired in series.
Solid copper will patina outdoors, which is normal.
We recommend installation by a registered NICEIC electrician.