Hunza Pure LED Sign Light Retro - Copper - Mains

A Copper Sign Light That Plugs Into the Mains

Lighting a name plate or a wall display does not always call for low voltage cabling. The Hunza Pure LED Sign Light Retro is the mains version, designed to illuminate signs, wall displays and building features from a fully adjustable head on a 500mm arm. The LED chip is built in, so there is no separate lamp to buy, and the LED board is field replaceable.

Solid Copper Made to Mellow

Hunza makes this fitting from solid copper and intends it to be left outdoors. It starts out bright and warm, then deepens to brown and eventually to a soft green as it weathers. Colours are for indication only and swatches are available on request. If you want a finish that does not change, look at the stainless steel or powder coated versions.

How It Works

• Aim it where you need it, with 360 degree rotation and 0 to 90 degrees of elevation.
• The Cree LED chip is rated at 420 lumens from 4 watts, with CRI 90 or more at 3000K, and is serviceable.
• Colour temperature options are 2200K, 2700K, 3000K and 4000K, with 15, 25, 38 or 60 degree beams and a clear or frosted lens.
• Head 63.5mm diameter by 75mm long, pole 38mm diameter by 500mm long, base 78mm diameter by 55mm deep. Comes with 1m of cable.
• No driver is needed, as it runs on mains. It is not dimmable.
• IP66 rated, 10 year warranty and 5 years on the LED.

Where It Works Best

• Heritage signs and pub fronts where copper suits the character
• Estate and farm entrance signs
• Walls beside a mains supply, avoiding a driver and series wiring
• Stone plaques and carved house names

Lighting Advice From Moonlight Design

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. On our Design Service page you can browse photographs of schemes we have completed ourselves, along with the steps we follow to plan, draw up and install a layout using NICEIC registered electricians. You are welcome to look through it for ideas.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Solid copper will darken and patina over time, which is normal.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Does the copper sign light need a driver?
No. It is a mains version, so no remote driver is required.

How much light does it give?
The LED is rated at 420 lumens from 4 watts.

Will it change colour?
Yes. Solid copper weathers from bright copper to brown and eventually green.

What is the warranty?
10 years on the fitting and 5 years on the LED.

Body
Diameter: 63.5mm
Length: 75mm

Pole
Diameter: 38mm
Length: 500mm

Base
Diameter: 78mm
Depth: 55mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Sign Lite Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.