Hunza Pure LED Bollard 300mm (Spike Mounted) - Copper - Low Voltage

A Copper Post Light for the Edge of the Path

Short, slim and set on a spike, the 300mm Hunza Pure LED Bollard is made for places where you want a pool of light at ground level and nothing more. It is 350mm tall, with a 145mm spike that anchors it in the soil of a border or the edge of a gravel path. Its mirror finished reflector throws light two ways, straight down and horizontally outward, and the UV stable acrylic lens has an anti glare mesh to keep the glare away from your eyes.

Copper That Grows Into Its Surroundings

Solid copper is a natural finish designed to weather and patina. New, it is bright and warm, then it deepens to brown over the seasons and on to a soft green. This is normal and not a fault. It suits planted settings, where the colour of the metal settles in alongside the foliage. Four colour temperatures are offered, 2200K to 4000K.

The Details

• Cree LED chip rated at 510 lumens from 6 watts, CRI 90 or more at 3000K, and the chip is replaceable.
• Diameter 63.5mm, height 350mm and a 145mm spike, with 1m of cable supplied.
• Choose from 2200K, 2700K, 3000K or 4000K.
• A low voltage fitting that is wired in series and needs a remote driver, for example the Hunza 1050mA driver (sold separately).
• Works with a suitable dimmable driver if you want to dim it.
• IP56/IP66 rated, 10 year warranty with 5 years on the LED.

Good Places for It

• Lining a winding garden path in a repeating rhythm
• Tucked into shrubs and perennials, lighting the plants around it
• Marking a gravel drive or the corner of a turning area
• Beside steps or a patio edge where the ground needs a gentle guide

How We Plan and Install Hunza Lighting

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them using NICEIC registered electricians. Our Design Service page shows photographs of our own completed schemes, along with how we plan and draw up a lighting layout. Take a look if you would like to see how a path lighting scheme comes together.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The LED is integrated, so there is no separate lamp to buy.
• A remote LED driver is needed and sold separately. Series wiring means the circuit should be planned by your electrician.
• Copper will darken and patina outdoors. That is what it is designed to do.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Will the copper bollard change colour?
Yes. Solid copper is designed to weather and patina, moving from bright copper to brown and then to a soft green over time.

What does the spike measure?
The spike is 145mm long, and the whole fitting stands 350mm tall.

What warranty does it have?
It has a 10 year warranty, with 5 years on the LED.

Is the light source replaceable?
The Cree LED chip is replaceable and the parts are serviceable.

Diameter: 63.5mm
Height: 350mm
Spike: 145mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Bollard BOL300 Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.