Hunza Pure LED Bollard 300mm (90mm Flange Mounted) - Copper - Low Voltage

A Copper Bollard That Lights the Path and the Planting

The Hunza Pure LED Bollard 300mm is a flange mounted post light for gardens, driveways, walkways and car parks. A twin angle reflector sends light two ways, straight down onto the ground and out sideways across the surroundings. This version is solid copper and uses a 90mm flange.

Solid Copper That Ages Naturally

Copper is a natural finish that Hunza expects to weather outdoors. It begins bright and warm, then darkens through brown, and may eventually turn a soft green. Set among planting or beside gravel, it ages into the garden rather than standing out against it.

How It Works

• The lens has a mirror finish, a twin angle reflector and a UV stable acrylic lens with anti glare mesh.
• An integrated Cree LED chip gives 510 lumens at 1050mA from 6 watts, with a CRI of 90 or more at 3000K. The parts are serviceable.
• Pick 2200K, 2700K, 3000K or 4000K.
• The body is 63.5mm in diameter and 375mm high, on a 90mm flange, with 1m of cable.
• Low voltage and installed in series with a remote driver, sold separately.
• Dimmable if a suitable dimmable driver is used.
• Rated IP56/IP66 with a 10 year warranty, 5 years on the LED.

Where It Works Best

• Along a garden path, to guide people and keep the edges visible
• Beside a gravel drive or parking area
• At the edge of a lawn or border
• Around a patio where you want light at low level

Planning Your Bollard Layout With Us

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them in real gardens. Our Design Service page has project photographs of our own completed schemes, and explains how we plan, draw up and install a layout with NICEIC registered electricians. Do pay it a visit if you want help spacing a run of bollards.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The LED is built in. A remote driver is needed and is sold separately.
• Wired in series, so your electrician should plan the circuit first.
• Copper changes colour outdoors, which is normal.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

How tall is the bollard?
The body is 375mm high and 63.5mm in diameter, mounted on a 90mm flange.

Which colour temperatures are available?
You can choose 2200K, 2700K, 3000K or 4000K.

Does it need a driver?
Yes. It is a low voltage fitting installed in series and needs a remote driver, sold separately.

Will the copper stay bright?
No. Copper is designed to weather, so it darkens over time and can develop a soft green patina.

Body
Diameter: 63.5mm
Height: 375mm

Flange
Diameter: 90mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Bollard BOL300 Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.