Fabula Sycamore Switched Wall Light 2 Light -IP44 with 15cm Round Double Textured Smooth & Ribbed Shade - Satin Nickel, Smoke Plated & Satin Black

A Softly Patterned Glow from Smoke Tinted Glass

This wall light brings together a satin nickel and satin black frame with two smoke plated glass shades, each one split between a smooth section and a ribbed section. The mix of textures gives the light a subtle pattern as it passes through, and with a pull switch built into the fitting, you can turn it on and off without reaching for a separate wall switch.

Choosing Your Finish

Satin nickel keeps this fitting feeling current, especially in rooms already furnished with chrome or steel accents. The smoke plated glass tints the light just enough to soften it without changing its colour dramatically, and the satin black backplate gives the whole thing a bit more depth. Should you want a different combination, other finishes are generally available elsewhere in the Sycamore range.

How It Works

Two E14 lamp holders sit behind the glass shades, and the double textured surface, smooth on one side and ribbed on the other, breaks the light into gentle variations rather than one flat beam. Bulbs aren't included, so you'll need to supply your own, up to 20W each, and choose dimmable ones if you plan to pair the fitting with a dimmer. It runs on Class II wiring, meaning no earth connection is required, and carries an IP44 rating, protecting it against splashing water from any direction.

Where It Works Best

The IP44 rating makes this fitting suitable for bathroom zones 1 and 2, so it can sit beside a mirror or above a vanity unit without issue. If you want the full picture on what each zone allows, our guide to bathroom lighting zones spells it out. Beyond the bathroom, it works just as well in a hallway, living room or bedroom, particularly mounted in pairs either side of a mirror or bed.

Design Details

This piece belongs to the Sycamore range, and its standout feature is the combination of smooth and ribbed glass within the same shade, which gives it more depth than a single texture would. Iron and glass make up the whole fitting, with the glass panels needing to be attached to the frame as part of installation. It's a considered piece of detailing that rewards a closer look.

Good to Know

• Takes two E14 LED candle bulbs, maximum 20W each, bulbs not included
• Dimmable when used with dimmable bulbs and a compatible dimmer switch
• Class II electrical rating, no earth connection required
• IP44 rated, suitable for bathroom zones 1 and 2
• Comes with a pull switch built into the fitting
• Made from iron and glass
• Glass shades need to be attached to the frame during installation
• Height 46cm, width 22cm, projection 20cm
• Weighs 0.9kg
• 1 year warranty
• Unfortunately we're unable to deliver this item to Northern Ireland, the Scottish Highlands, the Isle of Wight, Jersey or Guernsey

Questions People Ask

Can this go in a bathroom?
Yes, its IP44 rating covers bathroom zones 1 and 2, so it can be mounted near a sink or mirror, just not inside the shower enclosure itself.

Does the smoke tint change the light colour much?
Only slightly. It takes the edge off a bright bulb and gives a warmer, softer look rather than a dramatic colour shift.

Do I need to fit the glass myself?
Yes, the glass shades attach to the frame during installation, which is a straightforward part of setting the fitting up.

Height: 46cm
Width: 22cm
Projection: 20cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.