Orluna M-700-L Mains Dimmable Driver - 700mA 12W

The Orluna M-700-L is a 700mA constant current driver with mains dimming, giving installers a straightforward way to bring dimmer control to Orluna fittings that run on a 700mA supply.

Matching This Driver To Your Fitting

Check first that the Orluna fitting you are installing is specified for a 700mA constant current supply, as current matching between driver and LED engine is essential for correct, stable performance. For dimming, this driver pairs with standard leading and trailing edge dimmer switches, so confirm the dimmer's rated load range covers the fitting before wiring it in. Your Orluna supplier can confirm the correct pairing if you are working from a spec sheet rather than the physical fitting.

How It Works

The M-700-L draws a mains supply and regulates it down to a constant 700mA current, rated at up to 12W. Dimming happens on the mains side through a compatible leading or trailing edge dimmer switch, which the driver translates into a smooth change in light output rather than a stepped one.

Where It Works Best

At 12W, the M-700-L sits between Orluna's other 700mA options, offering a little more headroom than the 10W M-700 while staying well below the 25W ceiling of the M-700-2. That makes it a practical middle ground for fittings that need slightly more power than the smallest 700mA driver but do not need the capacity of the largest. Keep it somewhere accessible for future servicing, as with any remote driver.

Made By Orluna

Many Orluna fittings are built modularly, so components such as bezels, reflectors, lenses and drivers can be replaced individually instead of the whole fitting being discarded. Drivers like the M-700-L are engineered with that long term approach in mind, designed to be swapped out and renewed as part of Orluna's wider 20 year spares and repair programme rather than treated as disposable parts.

Good To Know

• Constant current output: 700mA
• Maximum power: 12W
• Input: Mains voltage
• Dimming: Compatible with standard leading and trailing edge dimmer switches
• Suitable for use with Orluna fittings rated to the same current
• Covered under Orluna's 20 year spares and repair programme as a replaceable component

Questions People Ask

How is the M-700-L different from the M-700? Both run at 700mA, but the M-700-L is rated to a higher 12W compared with the M-700's 10W, giving it slightly more headroom for the connected fitting.

Does this driver need a special dimmer switch? No, it works with standard leading and trailing edge dimmer switches, though the dimmer's rated load range should still be checked against the fitting.

Can it be swapped for a different wattage 700mA driver later? Yes, as a modular replaceable component it can be exchanged for the M-700 or M-700-2 if the fitting's load requirements change.

99.1mm length x 39.3mm width x 23mm depth

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.