LuxR Modux 2 Pole Spot Glare Guard Black or Bronze

A Shielded Pole Spot in Seven Powder Coat Colours

The LuxR Modux 2 Pole Spot with Glare Guard is a small low voltage spotlight on a 400mm pole, with an adjustable hood fitted over the lens. The hood hides the LED from direct view and keeps stray light away from people nearby. Seven powder coat colours mean the whole fitting can sit quietly in the border or match your other outdoor metalwork.

Powder Coated Aluminium

The fitting is made in aluminium with a UV stable polyester Eco matt powder coat, available in matt black, matt bronze, matt olive green, matt white, matt white birch, matt dark grey and matt silver star. Matt black is a deep, non reflective black, and matt bronze is a dark brown. Inside is a screw mounted 2 watt Cree LED, which the brand states delivers around 180 lumens.

What the Glare Guard Does

The guard is a friction fit hood that turns through a full 360º and holds its position once set. It protects the eye from the direct sparkle of the LED and lets you direct light away from where it is not wanted. The glass is fitted flush so water does not pool on the lens, and a hexcell louvre baffle can be used with the guard for tighter control.

Choose Your Colour, Beam, Temperature and Lens

Colour: any of the seven powder coat finishes.
Beam: 26º is narrow, 36º is medium and 74º is wide.
Colour temperature: 2200K is very warm, 2700K and 3000K are warm white, and 4000K is neutral white.
Lens: clear for a crisp beam, frosted for softer edges.

How It Works

Push the pole into the soil, tilt the head and turn the hood to cut glare. The fitting runs on low voltage and needs a suitable driver, which is sold separately. A dimmable driver lets you dim the light. The LED and the optic can be replaced later.

Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.

Where It Works Best

Choose it where the light will be seen from the side, such as beside a path, patio or window. It lights trees, shrubs and sculpture as the standard pole spot does, with a calmer view of the fitting itself. We can also supply longer poles, so please contact us to discuss the length you need.

Good to Know

Dimensions: head 40.6mm diameter, pole 400mm, overall length 550.1mm with the glare guard fitted, or 505.3mm with the standard head. Longer poles are available on request, please contact us.
Rated IP68 for protection against dust and water, so it is built for outdoor use.
Warranty: 5 years on the aluminium, LED and electronics.
Colours marked Non-Returnable in the colour selector cannot be returned once ordered.
Colours shown are for guidance only. Physical colour swatches are available on request.
Made in New Zealand.
Usually ships in 2 to 3 days. If out of stock, allow 3 to 5 weeks.

Questions People Ask

What does the glare guard add to the powder coat pole spot?

It adds an adjustable hood over the lens that stops the LED being seen directly and reduces light spill towards people nearby.

How tall is the pole spot with glare guard?

The pole is 400mm long and the whole fitting measures 550.1mm from the tip of the spike to the top of the glare guard. How much shows above ground depends on how deep you push it into the soil.

What finishes are available?

Seven finishes: matt black, matt bronze, matt olive green, matt white, matt white birch, matt dark grey and matt silver star. Bronze is a dark brown.

Can the hood be adjusted?

Yes. It turns through 360º and stays in position by friction.

Is a driver included?

No. It is a low voltage fitting and needs a suitable driver, sold separately. We recommend a registered electrician installs it.

Can I get a longer pole?

Yes. We can supply longer poles, so please contact us with the length you need.

Recent searches

Popular right now

Shop By Brand

LuxR Modux 2 Pole Spot with Glare Guard - Powder Coat - Low Voltage