LuxR Modux 2 Louvre Recessed - Stainless Steel - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Tiny Stainless Steel Louvre Recessed Wash Light
The LuxR Modux 2 Louvre Recessed is a very small low voltage recessed light that produces an attractive wash of light. It is often used to light stair treads, and it sits in a 43.5mm cut out. The beam is an asymmetric wash, so the light is thrown across a surface rather than straight down.
Marine Grade 316 Stainless Steel
This version is precision machined from marine grade 316 stainless steel, a tough, corrosion resistant finish with a distinctly nautical feel. The light source is a 2 watt Cree LED with a CRI of 90 plus, and the fitting is rated IP68.
Choose Your Colour Temperature
- Colour temperature: 2200K is a very warm glow, 2700K and 3000K are warm white, and 4000K is a crisper neutral white that pairs well with the cool metal.
How It Works
Set the fitting into a 43.5mm cut out so the louvre throws its light across the tread or surface. It runs on low voltage, so it needs a suitable constant current driver, which is not included, and it is wired in series. It is dimmable when paired with a suitable dimmable driver. The Cree LED can be replaced or swapped for a colour LED, and the optic can be changed to alter the beam width.
Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.
Where It Works Best
Use it on steps, decking and walls in coastal gardens, by pools or anywhere with a lot of weather. It is also available in M4.
Good to Know
- Cut out: 43.5mm.
- Material: marine grade 316 stainless steel.
- Beam: asymmetric wash.
- Rated IP68 for protection against dust and water.
- 2 watt LED at 85 lumens per watt, low voltage, series wiring.
- Warranty: 10 years on the body, with 5 years on the LED.
- Made in New Zealand by the makers of Hunza.
- Usually ships in 2 to 3 days. If out of stock, allow 3 to 5 weeks.
Questions People Ask
What size hole do I need?
The cut out is 43.5mm.
Does it come with a driver?
No. It is a low voltage fitting and needs a suitable constant current driver, sold separately. A dimmable driver lets you dim the light. We recommend a registered electrician installs it.
Is stainless steel a good choice near the sea?
This version is marine grade 316 stainless steel, which is chosen for wet and coastal conditions.
Is it good for lighting steps?
Yes. It produces an asymmetric wash of light and is often used to illuminate stair treads.
Can I change the LED later?
Yes. The Cree LED can be replaced or swapped for a colour LED, and the optic can be changed to alter the beam width.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
